Stainless Steel 321 Fasteners

321 SS Fasteners, Stainless Steel 321 Stud Bolts In Indonesia, ASTM A193 SS 321 Washers, Stainless Steel 321 Bolts, SS 321 Nuts Price in India.

Bagoda Steel is a standard supplier and seller of SS 321 Fasteners, which normally comes with inside the annealed circumstance. It has High strength; High resistance to pitting, crevice corrosion resistance; and High resistance to strain corrosion cracking, corrosion fatigue and erosion. It is used generally in applications that require welding due to its robust weldability properties. Stainless Steel UNS S32100 Fasteners is one of the maximum not unusual place grades, with properties that make it a great candidate for chemical and marine, aerospace and medical applications. It has a minimal yield strength of 275 Mpa (forty ksi), and comparatively low tiers of impurity elements, which locations in phrases of strength. It has appropriate mechanical properties and has been used for orthopedic and dental implants.

Stainless Steel 321 fasteners

SS 321 Flat Washers, UNS S32100 Allen Cap Screw, SS 321 Carriage Bolts Stockist, 321 Stainless Steel Threaded Rod, 1.4541 Nuts, SUS 321 Anchor Bolts, SS 321 Fasteners In Malaysia, Stainless Steel 321 Hex Bolts In Kuwait, SS 321 Screws Supplier in Mumbai, India.

+91 22 - 66151721
sales@bagodasteelproject.com
+91 9011334411

It has intermediate and very last annealing in inert fueloline or vacuum, and plays very last warmth remedies in vacuum. Corrosion resistance of fasteners comes from a strongly adherent, stable, shielding oxide film, which paperwork within the presence of oxygen. It is one of the maximum not unusual place grades and is used for Heat exchangers, condenser tubing and bleaching vegetation in paper industry, offshore oil set up water pipe lines. Stainless Steel WNR 1.4541 Fasteners has splendid deep drawing exceptional and is to be had in distinct sizes, shapes and designs for our esteemed clients. It is used for plenty of family and industrial applications including screws, equipment parts, vehicle headers, and food-coping with equipment.

It is without difficulty brake or roll-formed into plenty of additives for applications within the industrial, architectural, and transportation fields. It has splendid toughness, even right all the way down to cryogenic temperatures that are described as very low temperatures. It is determined in plenty of industrial sectors, mainly within the chemical industry. 321 Stainless Steel Fasteners is regularly utilized in kitchen benches, equipment, sinks, troughs, and appliances, in conjunction by means of having in architectural trim and molding. It may be used within the welded circumstance instead of the annealed circumstance and nevertheless preserve resistance to corrosion and lend themselves with many kinds of fabrication.

Material Specification Chart of SS 321 Fasteners

Standard ASTM A193 / A194, ASME SA193 / SA194
Size M 02 to M 33
Length 3 mm to 200 mm
Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard: DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Stud Bolt length are defined in ASME B16.5 standard
  • Hex nuts are defined in ASME B18.2.2
  • ASME B18.5
  • BS en iso 3506

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards

Scope of Manufacturer
  • Up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia M6 to M64 (1/4" - 2.5")
Length 12 MM - 500 MM (Upto 20 Inch)
IS 1363, 1364
DIN 931, 933
ISO ISO 3506
Form of: Hex, Square, Round, Threading as per Gauge Etc.
Head Drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing: Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production Process M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Types Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts

SS 321 Fasteners Manufacturing Standards

Hexagon Bolt / Set Screws Stud Bolt Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693
DIN 553 BS 2470 Spring Washers
DIN 438 DIN 127
BS 4168 BS 4464
BS 1802

ANSI and/or ASME Standards (inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screws and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screws Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

Various Types Of 321 Stainless Steel Fasteners

SS 321 Bolts
SS 321 Bolts
  • 1.4541 Heavy Hex Bolts
  • Stainless Steel 321 Bolts In Indonesia
  • 321 SS Hex Bolts In Malaysia
  • ASME SA193 SS 321 Bolts
  • UNS S32100 Bolts
  • ASTM A193 SS 321 Bolts
SS 321 Nuts
SS 321 Nuts
  • Stainless Steel 321 Nuts In Mexico
  • 1.4541 Heavy Hex Nuts
  • UNS S32100 Nuts
  • ASTM A194 SS 321 Nuts
  • 321 SS Hex Nuts In Philippines
  • ASME SA194 SS 321 Nuts
SS 321  Screw
SS 321 Screw
  • Stainless Steel 321 Screw In Japan
  • 321 SS Allen Cap Screw In Italy
  • 1.4541 Hex Cap Screws
  • ASME SA193 SS 321 Screw
  • ASTM A193 SS 321 Screw
  • UNS S32100 Socket Set Screws
SS 321 Washers
SS 321 Washers
  • ASME SA193 SS 321 Washers
  • UNS S32100 Lock Washers
  • 1.4541 Beveled Washers
  • 321 SS Flat Washer In Spain
  • Stainless Steel 321 Washers In Kuwait
  • ASTM A193 SS 321 Washers
SS 321 Threaded Rods
SS 321 Threaded Rods
  • ASME SA193 SS 321 Threaded Rods
  • UNS S32100 Threaded Rods
  • 321 SS Threaded Rods In Singapore
  • ASTM A193 SS 321 Threaded Rods
  • Stainless Steel 321 Threaded Rods
  • 1.4541 Threaded Rods
SS 321 Stud Bolts
SS 321 Stud Bolts
  • 1.4541 Stud Bolts
  • Stainless Steel 321 Stud Bolts In Singapore
  • 321 SS Stud Bolts In Kuwait
  • UNS S32100 Stud Bolts
  • ASTM A193 SS 321 Stud Bolts
  • ASME SA193 SS 321 Stud
SS 321 Anchor Bolts
SS 321 Anchor Bolts
  • 1.4541 J Anchor Bolts
  • ASTM A193 SS 321 Anchor Bolts
  • ASME SA193 SS 321 Self Tapping Anchor
  • 321 SS Wedge Anchor Bolt In Spain
  • Stainless Steel 321 Anchor Bolts In Indonesia
  • UNS S32100 Concrete Anchors

Equivalent Grades of Stainless Steel 321 Fasteners

STANDARDWERKSTOFF NR.UNSJISEN
SS 3211.4541S32100SUS 321X6CrNiTi18-10
Fasteners Dimensions

View Size Table Of 321 SS Fasteners, We have Global sales network for Stainless Steel 321 Stud Bolts, Wide Stockist Of Werkstoff No 1.4541 Nuts, Bolts, Washers In India.

Size Chart of SS 321 Bolts

Nominal or Basic Product Diameter E F G H J LT (Thread Length) Y
Body Diameter Width Across Flats Width Across Corners Head Height Wrenching Height For Screw Lengths For Screw Lengths Transition Thread Length
1/4 0.25 0.25 0.245 7/16 0.438 0.428 0.505 0.488 5/32 0.163 0.150 0.106 0.750 1.000 0.250
5/16 0.3125 0.3125 0.3065 1/2 0.500 0.489 0.577 0.557 13/64 0.211 0.195 0.140 0.875 1.125 0.278
3/8 0.375 0.375 0.369 9/16 0.562 0.551 0.650 0.628 15/64 0.243 0.226 0.160 1.000 1.250 0.312
7/16 0.4375 0.4375 0.4305 5/8 0.625 0.612 0.722 0.698 9/32 0.291 0.272 0.195 1.125 1.375 0.357
1/2 0.5 0.5 0.493 3/4 0.750 0.736 0.866 0.840 5/16 0.323 0.302 0.215 1.250 1.500 0.385
9/16 0.5625 0.5625 0.5545 13/16 0.812 0.798 0.938 0.910 23/64 0.371 0.348 0.250 1.375 1.625 0.417
5/8 0.625 0.625 0.617 15/16 0.938 0.922 1.083 1.051 25/64 0.403 0.378 0.269 1.500 1.750 0.455
3/4 0.75 0.75 0.741 1-1/8 1.125 1.100 1.299 1.254 15/32 0.483 0.455 0.324 1.750 2.000 0.500
7/8 0.875 0.875 0.866 1-5/16 1.312 1.285 1.516 1.465 35/64 0.563 0.531 0.378 2.000 2.250 0.556
1 1 1 0.99 1-1/2 1.500 1.469 1.732 1.675 39/64 0.627 0.591 0.416 2.250 2.500 0.625
1-1/8 1.125 1.125 1.114 1-11/16 1.688 1.631 1.949 1.859 11/16 0.718 0.658 0.461 2.500 2.750 0.714
1-1/4 1.25 1.25 1.239 1-7/8 1.875 1.812 2.165 2.066 25/32 0.813 0.749 0.530 2.750 3.000 0.714
1-1/2 1.5 1.5 1.488 2-1/4 2.250 2.175 2.598 2.480 15/16 0.974 0.902 0.640 3.250 3.500 0.833

Check available Sizes of ASME SA 193 SS 321 Stud Bolt, Ask For Ready Stock of UNS S32100 Fasteners in Mumbai, India.

BAGODA

Quick Contact

SS 321 Washer Weight & Dimensions

Bolt Size A B C Weight (lbs.) Per 100 Pieces
ID OD Thickness
1/2 9/16 13/8 0.109 4
5/8 11/16 13/4 0.134 8
3/4 13/16 2 0.148 11
7/8 15/16 21/4 0.165 15
1 11/16 21/2 0.165 19
11/8 11/4 23/4 0.165 22
11/4 13/8 3 0.165 26
13/8 11/2 31/4 0.180 33
11/2 15/8 31/2 0.180 38
15/8 13/4 33/4 0.180 43
13/4 17/8 4 0.180 50
17/8 2 41/4 0.180 57
2 21/8 41/2 0.180 63
21/4 23/8 43/4 0.220 83
21/2 25/8 5 0.238 96
23/4 27/8 51/4 0.259 110
3 31/8 51/2 0.284 130

SS 321 Stud Bolt Size Chart

Class 150 Flanges ASME B16.5 (Stud bolt sizes) Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in
Ring Joint
1/2 3 1/2 2 3/8 5/8 4 1/2 2 1/4
3/4 3 7/8 2 3/4 5/8 4 1/2 2 1/2
1 4 1/4 3 1/8 5/8 4 1/2 2 1/2 3
1 1/4 4 5/8 3 1/2 5/8 4 1/2 2 3/4 3 1/4
1 1/2 5 3 7/8 5/8 4 1/2 2 3/4 3 1/4
2 6 4 3/4 3/4 4 5/8 3 1/4 3 3/4
2 1/2 7 5 1/2 3/4 4 5/8 3 1/2 4
3 7 1/2 6 3/4 4 5/8 3 1/2 4
3 1/2 8 1/2 7 3/4 8 5/8 3 1/2 4
4 9 7 1/2 3/4 8 5/8 3 1/2 4
5 10 8 1/2 7/8 8 3/4 3 3/4 4 1/4
6 11 9 1/2 7/8 8 3/4 4 4 1/2
8 13 1/2 11 3/4 7/8 8 3/4 4 1/4 4 3/4
10 16 14 3/4 1 12 7/8 4 1/2 5
12 19 17 1 12 7/8 4 3/4 5 1/4
14 21 18 3/4 1 1/8 12 1 5 1/4 5 3/4
16 23 1/2 21 1/4 1 1/8 16 1 5 1/4 5 3/4
18 25 22 3/4 1 1/4 16 1 1/8 5 3/4 6 1/4
20 27 1/2 25 1 1/4 20 1 1/8 6 1/4 6 3/4
24 32 29 1/2 1 1/4 20 1 1/4 6 3/4 7 1/4
Class 300 Flanges ASME B16.5 Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in
Ring Joint
1/2 3 3/4 2 5/8 5/8 4 1/2 2 1/2 3
3/4 4 5/8 3 1/4 3/4 4 5/8 3 3 1/2
1 4 7/8 3 1/2 3/4 4 5/8 3 3 1/2
1 1/4 5 1/4 3 7/8 3/4 4 5/8 3 1/4 3 3/4
1 1/2 6 1/8 4 1/2 7/8 4 3/4 3 1/2 4
2 6 1/2 5 3/4 8 5/8 3 1/2 4
2 1/2 7 1/2 5 7/8 7/8 8 3/4 4 4 1/2
3 8 1/4 6 5/8 7/8 8 3/4 4 1/4 4 3/4
3 1/2 9 7 1/4 7/8 8 3/4 4 1/4 5
4 10 7 7/8 7/8 8 3/4 4 1/2 5
5 11 9 1/4 7/8 8 3/4 4 3/4 5 1/4
6 12 1/2 10 5/8 7/8 12 3/4 4 3/4 5 1/2
8 15 13 1 12 7/8 5 1/2 6
10 17 1/2 15 1/4 1 1/8 16 1 6 1/4 6 3/4
12 20 1/2 17 3/4 1 1/4 16 1 1/8 6 3/4 7 1/4
14 23 20 1/4 1 1/4 20 1 1/8 7 7 1/2
16 25 1/2 22 1/2 1 3/8 20 1 1/4 7 1/2 8
18 28 24 3/4 1 3/8 24 1 1/4 7 3/4 8 1/4
20 30 1/2 27 1 3/8 24 1 1/4 8 8 3/4
24 36 32 1 5/8 24 1 1/2 9 10

Ready Stock Stainless Steel 321 Fasteners

  • 321 SS Foundation Bolts Manufacturer
  • SS 321 Hex Head Bolts In Indonesia
  • 321 Stainless Steel Hex Set Screw Manufacturer
  • Stainless Steel 321 Allen Cap Screw In Malaysia
  • ASME SA193 321 Stainless Steel Fender Washer
  • 1.4541 Fasteners
  • ASTM A193 Stainless Steel 321 Fasteners
  • Stainless Steel 321 Stud Bolts In Philippines
  • Stainless Steel 321 Concrete Screw In Mexico
  • Stainless Steel 321 Anchor Bolts In Japan
  • Stainless Steel 321 Socket Cap Screw In Italy
  • SS 321 Bolts In Spain
  • 321 Stainless Steel Hexagonal Washer
  • SS 321 Heavy Hex Nuts In Kuwait
  • 321 SS Hex Coupling Nut In Singapore
  • SS 321 Dock Washer Stockholder
  • SS 321 Stud Bolts
  • ASTM A193 SS 321 Nyloc Nuts
  • Stainless Steel 321 Bolts In Indonesia
  • Stainless Steel 321 Self Locking Nuts
  • 321 Stainless Steel Lock Nut
  • ASTM A193 SS 321 Flat Washers
  • 321 Stainless Steel Ogee Washer
  • SS 321 Fasteners In Malaysia
  • Stainless Steel 321 Coupling Nut In Mexico
  • Stainless Steel 321 T-Head Bolts In Philippines
  • SS 321 Tooth Lock Washer
  • 321 Stainless Steel Eye Bolts
  • UNS S32100 Fasteners
  • SS 321 Screws Distributor
  • ASTM A194 SS 321 Wing Nuts
  • 321 SS Tie Rods
  • Stainless Steel SUS 321 Split / Lock Washer
  • Stainless Steel 321 Elevator Bolt
  • 321 SS Plain Washer Supplier in Mumbai
  • 321 Stainless Steel Customized Washer In Mexico
  • Stainless Steel 321 Hex Head Bolt
  • 321 Stainless Steel Washers
  • Stainless Steel 321 Hex Domed Cap Nuts
  • 321 Stainless Steel Acorn Nuts
  • SS 321 Heavy Hex Bolts
  • DIN 1.4541 Countersunk Washer
  • SS 321 Flange Bolt
  • 321 SS Threaded Rod
  • AISI 321 Double Ended Stud
  • 321 SS Carriage Bolt Stockist
  • Stainless Steel 321 Machine Fasteners Exporter
  • Stainless Steel 321 Hex Washers In Philippines
  • Stainless Steel 321 Square Nuts
  • Stainless Steel 321 Wing Nuts
  • 321 Stainless Steel Structural Bolts In Italy
  • 321 Stainless Steel Machine Bolt

Stainless Steel 321 Fasteners Chemical Composition

GradeCMnSiPSCrMoNiFe
SS 3210.08 max2.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.005(C+N) – 0.70 max

321 Stainless Steel Fasteners Mechanical Properties

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
8.0 g/cm31457 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %

Export Destinations For 321 SS Fasteners

industry