• Shop No 6 , 23/A C.P Tank Road, Mumbai 400004.
  • Talk With Our Experts +91 9011334411

Stainless Steel 317 / 317L Fasteners

SS 317L Nuts, ASTM A193 SS 317 Washers, 317 SS Fasteners In Indonesia, Stainless Steel 317L Bolts, Stainless Steel 317 Stud Bolts Price in India.

Bagoda Steel is a standard supplier and distributor of Stainless Steel 317 Fasteners / Stainless Steel 317L Fasteners, which is a first-rate mixture of strength, corrosion resistance, weld and fabricability. It has a few brilliant functions to provide including Accurate dimension, Excellent performance, Long carrier life, Reasonable price, Low maintenance, Optimality, Ease of fabrication, etc. The purchasing retailers hired with us make sure that our professionals use best raw material for the fabrication of our Stainless Steel UNS S31700 Fasteners, where its resistance to fatigue and crack propagation is first-rate. They are broadly acclaimed within the enterprise for his or her durable nature, sturdy construction, dimensional accuracy, excessive tensile strength and rust loose nature. We have the widest variety of alloys in a single roof synthetic below strict best norms, which can be similarly synthetic, the usage of superlative best raw materials. Due to their several advantages, these steel products are stated in diverse heat-checking out equipments. Stainless Steel UNS S31703 Fasteners is absolutely heat-treatable in phase sizes up to at least one inch, and is used as much as about four hundred Degree C (750 Degree F).

Industrial Product
Stainless Steel 317 / 317L fasteners

SS 317L Flat Washers, SS 317 Carriage Bolts Stockist, SS 317 Fasteners In Spain, 317 Stainless Steel Threaded Rod, Stainless Steel 317L Hex Bolts In Japan, SS 317 Screws, UNS S31700 Allen Cap Screw, SUS 317L Anchor Bolts, 1.4449 Nuts Supplier in Mumbai, India.

+91 22 - 66151721
sales@bagodasteelproject.com
+91 9011334411

It is the alloy utilized in motorsport and in aerospace as properly, that's as properly an alloyed with Aluminum and Vanadium. It is likewise regularly utilized in compressor blades, earrings for jet engines, discs, plane additives, rocket engine cases, strain vessels, etc. Stainless Steel WNR 1.4449 Fasteners is worked to the nearest length of the preferred element and the grain shape of the completed piece is extra homogenous. Moreover, our cap-potential to satisfy emergent of bulk orders within the exact time has enabled us to serve massive clientele.

It may be used within the introduction of such technical matters as: Engine additives, Aircraft turbines, Aircraft structural additives, Aerospace fasteners, etc. Stainless Steel WNR 1.4438 Fasteners is regularly utilized in requiring low tensile strength, additives of small go phase, in addition to heavy forging within the normalized situation for automotive & formed engineering including presses & Punches Parts, axles, take hold of shafts, Piston rods & tools rods.

Material Specification Chart of SS 317 / 317L Fasteners

Standard ASTM A193 / A194, ASME SA193 / SA194
Size M 02 to M 33
Length 3 mm to 200 mm
Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard: DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Stud Bolt length are defined in ASME B16.5 standard
  • Hex nuts are defined in ASME B18.2.2
  • ASME B18.5
  • BS en iso 3506

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards
Scope of Manufacturer
  • Up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia M6 to M64 (1/4" - 2.5")
Length 12 MM - 500 MM (Upto 20 Inch)
IS 1363, 1364
DIN 931, 933
ISO ISO 3506
Form of: Hex, Square, Round, Threading as per Gauge Etc.
Head Drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing: Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production Process M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Types Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts

SS 317 / 317L Fasteners Manufacturing Standards

Hexagon Bolt / Set Screws Stud Bolt Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693
DIN 553 BS 2470 Spring Washers
DIN 438 DIN 127
BS 4168 BS 4464
BS 1802

ANSI and/or ASME Standards (inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screws and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screws Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

Various Types Of 317 / 317L Stainless Steel Fasteners

SS 317 / 317L Bolts
SS 317 / 317L Bolts
  • ASME SA193 SS 317L Bolts
  • UNS S31703 Bolts
  • 317 SS Hex Bolts In Malaysia
  • Stainless Steel 317 Bolts In Indonesia
  • ASTM A193 SS 317L Bolts
  • 1.4438 Heavy Hex Bolts
SS 317 / 317L Nuts
SS 317 / 317L Nuts
  • Stainless Steel 317 Nuts In Mexico
  • UNS S31700 Nuts
  • ASTM A194 SS 317L Nuts
  • 1.4449 Heavy Hex Nuts
  • ASME SA194 SS 317 Nuts
  • 317L SS Hex Nuts In Philippines
SS 317 / 317L Screw
SS 317 / 317L Screw
  • 317 SS Allen Cap Screw In Italy
  • ASME SA193 SS 317L Screw
  • Stainless Steel 317 Screw In Japan
  • ASTM A193 SS 317L Screw
  • 1.4438 Hex Cap Screws
  • UNS S31703 Socket Set Screws
SS 317 / 317L Washers
SS 317 / 317L Washers
  • 1.4449 Beveled Washers
  • 317 SS Flat Washer In Kuwait
  • UNS S31700 Lock Washers
  • ASME SA193 SS 317L Washers
  • Stainless Steel 317 Washers In Spain
  • ASTM A193 SS 317L Washers
SS 317 / 317L Threaded Rods
SS 317 / 317L Threaded Rods
  • ASME SA193 SS 317L Threaded Rods
  • 1.4438 Threaded Rods
  • ASTM A193 SS 317 Threaded Rods
  • UNS S31703 Threaded Rods
  • 317L SS Threaded Rods In Indonesia
  • Stainless Steel 317 Threaded Rods In Singapore
SS 317 / 317L Stud Bolts
SS 317 / 317L Stud Bolts
  • 1.4449 Stud Bolts
  • UNS S31700 Stud Bolts
  • Stainless Steel 317 Stud Bolts In Malaysia
  • 317L SS Stud Bolts In Mexico
  • ASME SA193 SS 317L Stud
  • ASTM A193 SS 317 Stud Bolts
SS 317 / 317L Anchor Bolts
SS 317 / 317L Anchor Bolts
  • ASTM A193 SS 317L Anchor Bolts
  • 317 SS Wedge Anchor Bolt In Indonesia
  • Stainless Steel 317 Anchor Bolts In Spain
  • 1.4438 J Anchor Bolts
  • UNS S31703 Concrete Anchors
  • ASME SA193 SS 317L Self Tapping Anchor

Equivalent Grades of Stainless Steel 317 / 317L Fasteners

STANDARD WERKSTOFF NR. UNS JIS EN
SS 317 1.4449S31700 SUS 317 –
SS 317L 1.4438S31703 SUS 317LX2CrNiMo18-15-4
Fasteners Dimensions

View Size Table Of 317 SS Fasteners, We have Global sales network for Stainless Steel 317L Stud Bolts, Wide Stockist Of Werkstoff No 1.4438 Nuts, Bolts, Washers In India.

Size Chart of SS 317 / 317L Bolts

Nominal or Basic Product Diameter E F G H J LT (Thread Length) Y
Body Diameter Width Across Flats Width Across Corners Head Height Wrenching Height For Screw Lengths For Screw Lengths Transition Thread Length
1/4 0.25 0.25 0.245 7/16 0.438 0.428 0.505 0.488 5/32 0.163 0.150 0.106 0.750 1.000 0.250
5/16 0.3125 0.3125 0.3065 1/2 0.500 0.489 0.577 0.557 13/64 0.211 0.195 0.140 0.875 1.125 0.278
3/8 0.375 0.375 0.369 9/16 0.562 0.551 0.650 0.628 15/64 0.243 0.226 0.160 1.000 1.250 0.312
7/16 0.4375 0.4375 0.4305 5/8 0.625 0.612 0.722 0.698 9/32 0.291 0.272 0.195 1.125 1.375 0.357
1/2 0.5 0.5 0.493 3/4 0.750 0.736 0.866 0.840 5/16 0.323 0.302 0.215 1.250 1.500 0.385
9/16 0.5625 0.5625 0.5545 13/16 0.812 0.798 0.938 0.910 23/64 0.371 0.348 0.250 1.375 1.625 0.417
5/8 0.625 0.625 0.617 15/16 0.938 0.922 1.083 1.051 25/64 0.403 0.378 0.269 1.500 1.750 0.455
3/4 0.75 0.75 0.741 1-1/8 1.125 1.100 1.299 1.254 15/32 0.483 0.455 0.324 1.750 2.000 0.500
7/8 0.875 0.875 0.866 1-5/16 1.312 1.285 1.516 1.465 35/64 0.563 0.531 0.378 2.000 2.250 0.556
1 1 1 0.99 1-1/2 1.500 1.469 1.732 1.675 39/64 0.627 0.591 0.416 2.250 2.500 0.625
1-1/8 1.125 1.125 1.114 1-11/16 1.688 1.631 1.949 1.859 11/16 0.718 0.658 0.461 2.500 2.750 0.714
1-1/4 1.25 1.25 1.239 1-7/8 1.875 1.812 2.165 2.066 25/32 0.813 0.749 0.530 2.750 3.000 0.714
1-1/2 1.5 1.5 1.488 2-1/4 2.250 2.175 2.598 2.480 15/16 0.974 0.902 0.640 3.250 3.500 0.833

Check available Sizes of ASME SA 193 SS 317 / 317L Stud Bolt, Ask For Ready Stock of UNS S31703 Fasteners in Mumbai, India.

BAGODA

Quick Contact

SS 317 / 317L Washer Weight & Dimensions

Bolt Size A B C Weight (lbs.) Per 100 Pieces
ID OD Thickness
1/2 9/16 13/8 0.109 4
5/8 11/16 13/4 0.134 8
3/4 13/16 2 0.148 11
7/8 15/16 21/4 0.165 15
1 11/16 21/2 0.165 19
11/8 11/4 23/4 0.165 22
11/4 13/8 3 0.165 26
13/8 11/2 31/4 0.180 33
11/2 15/8 31/2 0.180 38
15/8 13/4 33/4 0.180 43
13/4 17/8 4 0.180 50
17/8 2 41/4 0.180 57
2 21/8 41/2 0.180 63
21/4 23/8 43/4 0.220 83
21/2 25/8 5 0.238 96
23/4 27/8 51/4 0.259 110
3 31/8 51/2 0.284 130

SS 317 / 317L Stud Bolt Size Chart

Class 150 Flanges ASME B16.5 (Stud bolt sizes) Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 1/2 2 3/8 5/8 4 1/2 2 1/4 –
3/4 3 7/8 2 3/4 5/8 4 1/2 2 1/2 –
1 4 1/4 3 1/8 5/8 4 1/2 2 1/2 3
1 1/4 4 5/8 3 1/2 5/8 4 1/2 2 3/4 3 1/4
1 1/2 5 3 7/8 5/8 4 1/2 2 3/4 3 1/4
2 6 4 3/4 3/4 4 5/8 3 1/4 3 3/4
2 1/2 7 5 1/2 3/4 4 5/8 3 1/2 4
3 7 1/2 6 3/4 4 5/8 3 1/2 4
3 1/2 8 1/2 7 3/4 8 5/8 3 1/2 4
4 9 7 1/2 3/4 8 5/8 3 1/2 4
5 10 8 1/2 7/8 8 3/4 3 3/4 4 1/4
6 11 9 1/2 7/8 8 3/4 4 4 1/2
8 13 1/2 11 3/4 7/8 8 3/4 4 1/4 4 3/4
10 16 14 3/4 1 12 7/8 4 1/2 5
12 19 17 1 12 7/8 4 3/4 5 1/4
14 21 18 3/4 1 1/8 12 1 5 1/4 5 3/4
16 23 1/2 21 1/4 1 1/8 16 1 5 1/4 5 3/4
18 25 22 3/4 1 1/4 16 1 1/8 5 3/4 6 1/4
20 27 1/2 25 1 1/4 20 1 1/8 6 1/4 6 3/4
24 32 29 1/2 1 1/4 20 1 1/4 6 3/4 7 1/4
Class 300 Flanges ASME B16.5 Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 3/4 2 5/8 5/8 4 1/2 2 1/2 3
3/4 4 5/8 3 1/4 3/4 4 5/8 3 3 1/2
1 4 7/8 3 1/2 3/4 4 5/8 3 3 1/2
1 1/4 5 1/4 3 7/8 3/4 4 5/8 3 1/4 3 3/4
1 1/2 6 1/8 4 1/2 7/8 4 3/4 3 1/2 4
2 6 1/2 5 3/4 8 5/8 3 1/2 4
2 1/2 7 1/2 5 7/8 7/8 8 3/4 4 4 1/2
3 8 1/4 6 5/8 7/8 8 3/4 4 1/4 4 3/4
3 1/2 9 7 1/4 7/8 8 3/4 4 1/4 5
4 10 7 7/8 7/8 8 3/4 4 1/2 5
5 11 9 1/4 7/8 8 3/4 4 3/4 5 1/4
6 12 1/2 10 5/8 7/8 12 3/4 4 3/4 5 1/2
8 15 13 1 12 7/8 5 1/2 6
10 17 1/2 15 1/4 1 1/8 16 1 6 1/4 6 3/4
12 20 1/2 17 3/4 1 1/4 16 1 1/8 6 3/4 7 1/4
14 23 20 1/4 1 1/4 20 1 1/8 7 7 1/2
16 25 1/2 22 1/2 1 3/8 20 1 1/4 7 1/2 8
18 28 24 3/4 1 3/8 24 1 1/4 7 3/4 8 1/4
20 30 1/2 27 1 3/8 24 1 1/4 8 8 3/4
24 36 32 1 5/8 24 1 1/2 9 10

Ready Stock Stainless Steel 317 / 317L Fasteners

  • SS 317 Dock Washer Stockholder
  • SS 317L Fasteners In Indonesia
  • Stainless Steel 317 Stud Bolts In Malaysia
  • ASTM A193 SS 317L Nyloc Nuts
  • 317 Stainless Steel Lock Nut
  • Stainless Steel 317L Square Nuts In Mexico
  • SS 317L Heavy Hex Nuts
  • Stainless Steel 317L Bolts In Philippines
  • 317 SS Threaded Rod
  • Stainless Steel 317 Socket Cap Screw In Japan
  • Stainless Steel 317 Allen Cap Screw
  • 317 SS Foundation Bolts Manufacturer
  • 317L SS Carriage Bolt Stockist
  • 317L Stainless Steel Eye Bolts
  • Stainless Steel 317L Wing Nuts In Italy
  • UNS S31700 Fasteners
  • SS 317L Bolts In Kuwait
  • 317 Stainless Steel Washers In Spain
  • 317 Stainless Steel Acorn Nuts
  • Stainless Steel 317L Machine Fasteners Exporter
  • Stainless Steel 317L Hex Head Bolt In Singapore
  • SS 317L Flange Bolt
  • ASTM A194 SS 317 Wing Nuts
  • SS 317 Stud Bolts In Indonesia
  • SS 317L Screws Distributor
  • 317L Stainless Steel Structural Bolts
  • Stainless Steel SUS 317L Split / Lock Washer In Malaysia
  • Stainless Steel 317L Self Locking Nuts
  • Stainless Steel 317 Elevator Bolt In Mexico
  • 317 SS Plain Washer Supplier in Mumbai
  • ASTM A193 Stainless Steel 317L Fasteners
  • SS 317L Hex Head Bolts
  • Stainless Steel 317 Coupling Nut In Philippines
  • 317L SS Hex Coupling Nut
  • Stainless Steel 317 Anchor Bolts In Japan
  • 317 Stainless Steel Machine Bolt
  • 317L Stainless Steel Hex Set Screw Manufacturer
  • 317L Stainless Steel Hexagonal Washer
  • 317 Stainless Steel Customized Washer
  • 317 SS Tie Rods
  • ASTM A193 SS 317L Flat Washers
  • SS 317 Heavy Hex Bolts
  • Stainless Steel 317 Hex Washers In Italy
  • SS 317L Tooth Lock Washer In Singapore
  • Stainless Steel 317 T-Head Bolts In Spain
  • Stainless Steel 317L Hex Domed Cap Nuts
  • 317 Stainless Steel Ogee Washer
  • Stainless Steel 317 Concrete Screw In Kuwait
  • 1.4438 Fasteners
  • ASME SA193 317 Stainless Steel Fender Washer
  • AISI 317 Double Ended Stud
  • DIN 1.4449 Countersunk Washer

Stainless Steel 317 / 317L Fasteners Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max2.0 max0.045 max 0.030 max18.00 – 20.00 3.00 – 4.0011.00 – 15.00 57.845 min
SS 317L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.89 min

317 / 317L Stainless Steel Fasteners Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Export Destinations For 317/ 317L SS Fasteners

industry