Inconel 718 Fasteners, Alloy 718 Bolts, Inconel Alloy 718 Nuts Manufacturer

2.4668 Nuts, Inconel 718 Hex Bolts In Malaysia, Inconel 718 Flat Washers In Japan, Inconel® Alloy 718 Carriage Bolts, Alloy 718 Screws, UNS N07718 Allen Cap Screw, Nickel Alloy 718 Threaded Rod, Alloy 718 Anchor Bolts Stockist Supplier in Mumbai, India.

In age-hardening or precipitation-strengthening varieties, small quantities of niobium integrate with nickel to shape the intermetallic compound Ni3Nb or gamma double top. Gamma top paperwork small cubic crystals that inhibit slip and creep efficaciously at accelerated temperatures. The formation of gamma-top crystals will increase over time, especially after 3 hours of a warmness publicity of 850 Degree C (1560 Degree F), and keeps to develop after seventy two hours of publicity. External threads in Inconel Alloy WNR 2.4668 Fasteners are machined the usage of a lathe to "single-point" the threads or through rolling the threads within the answer handled condition (for hardenable alloys) the usage of a screw device.

After the primary machining pass, work hardening has a tendency to plastically deform either the work-piece or the device on next passes. For this reason, age-hardened alloys are generally machined the usage of a competitive however gradual reduce by means of having a difficult device, minimizing the range of passes required. Alternatively, the bulk of the machining may be done with the work piece in a "solutionized" shape, with handiest the very last steps being done after age hardening. However a few declare that Nickel Alloy 718 Fasteners may be machined extraordinarily quick with very speedy spindle speeds the usage of a multifluted ceramic device with small intensity of reduce at excessive feed costs as this reasons localised heating and softening in the front of the flute.

Material Specification Chart of Inconel 718 Fasteners

Standard	ASTM B637, ASME SB637
Size	M 02 to M 33
Length	3 mm to 200 mm
Threads:	METRIC, BSW, BSF, UNC, UNF or as required
Standard:	DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute ANSI B 18.2.4 2M ANSI B 28.2.4 1M Stud Bolt length are defined in ASME B16.5 standard Hex nuts are defined in ASME B18.2.2 ASME B18.5 BS en iso 3506 DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards
Scope of Manufacturer	Up to M36 / 1-1/2” Dia, up to 1100mm lg CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia	M6 to M64 (1/4" - 2.5")
Length	12 MM - 500 MM (Upto 20 Inch)
IS	1363, 1364
DIN	931, 933
ISO	ISO 3506
Form of:	Hex, Square, Round, Threading as per Gauge Etc.
Head Drive:	Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate:	Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing:	Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production Process	M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Types	Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts

ANSI and/or ASME Standards (inch series)

ASME B18.1.1	Small Solid Rivets	ASME B18.8.1	Clevis Pins and Cotter Pins
ASME B18.1.2	Large Rivets	ASME B18.8.2	Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1	Square and Hex Bolts and Screws	ASME B18.9	Plow Bolts
ASME B18.2.2	Square and Hex Nuts	ASME B18.10	Track Bolts and Nuts
ASME B18.2.6	Fasteners for use in Structural Applications	ASME B18.11	Miniature Screws
ASME B18.3	Socket Cap, Shoulder and Set Screws	ASME B18.13	Screws and Washer Assemblies (Sems)
ASME B18.5	Round Head Bolts	ASME B18.15	Forged Eyebolts
ASME B18.6.2	Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws	ASME B18.17	Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3	Machine Screws and Machine Screws Nuts	ASME B18.21.1	Lock Washers
ASME B18.6.4	Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws	ASME B18.22.1	Plain Washers
ASME B18.7	General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps	ASME B18.23.1	Beveled Washers

Various Types Of Inconel 718 Fasteners

Inconel 718 Bolts

2.4668 Heavy Hex Bolts
UNS N07718 Flange Bolts
ASTM B637 Inconel 718 Bolts
Inconel 718 Bolts In Indonesia
Alloy 718 Hex Bolts In Malaysia
ASME SB637 Inconel Alloy 718 Bolts

Inconel 718 Nuts

2.4668 Heavy Hex Nuts
ASME SB637 Inconel Alloy 718 Nuts
Alloy 718 Hex Nuts In Mexico
Inconel 718 Wing Nuts In Philippines
ASTM B637 Inconel 718 Nuts
UNS N07718 Nuts

Inconel 718 Screw

2.4668 Hex Cap Screws
UNS N07718 Socket Set Screws
Inconel 718 Screw In Japan
ASME SB637 Inconel Alloy 718 Screw
ASTM B637 Inconel 718 Screw
Alloy 718 Allen Cap Screw In Italy

Inconel 718 Washers

Alloy 718 Flat Washer In Kuwait
Inconel 718 Washers In Spain
ASTM B637 Inconel 718 Washers
ASME SB637 Inconel Alloy 718 Washers
UNS N07718 Lock Washers
2.4668 Beveled Washers

Inconel 718 Threaded Rods

2.4668 Threaded Rods
ASME SB637 Inconel Alloy 718 Threaded Rods
ASTM B637 Inconel 718 Threaded Rods
UNS N07718 Threaded Rods
Alloy 718 Threaded Rods In Singapore
Inconel 718 Threaded Rods In Indonesia

Inconel 718 Stud Bolts

ASME SB637 Inconel Alloy 718 Stud
2.4668 Stud Bolts
UNS N07718 Stud Bolts
ASTM B637 Inconel 718 Stud Bolts
Inconel 718 Tie Rods In Malaysia
Alloy 718 Stud Bolts In Kuwait

Inconel 718 Anchor Bolts

2.4668 J Anchor Bolts
Inconel 718 Anchor Bolts In Japan
Inconel 718 Wedge Anchor Bolt In Mexico
UNS N07718 Concrete Anchors
ASTM B637 Inconel 718 Anchor Bolts
ASME SB637 Inconel 718 Self Tapping Anchor

Equivalent Grades of Inconel 718 Fasteners

STANDARD	WERKSTOFF NR.	UNS
Inconel 718	2.4668	N07718

View Size Table Of Inconel 718 Fasteners, We have Global sales network for Inconel 718 Stud Bolts, Wide Stockist Of Werkstoff No 2.4668 Nuts, Bolts, Washers In India.

Size Chart of Inconel 718 Bolts

Nominal or Basic Product Diameter		E		F			G		H			J	LT (Thread Length)		Y
Nominal or Basic Product Diameter		Body Diameter		Width Across Flats			Width Across Corners		Head Height			Wrenching Height	For Screw Lengths	For Screw Lengths	Transition Thread Length
1/4	0.25	0.25	0.245	7/16	0.438	0.428	0.505	0.488	5/32	0.163	0.150	0.106	0.750	1.000	0.250
5/16	0.3125	0.3125	0.3065	1/2	0.500	0.489	0.577	0.557	13/64	0.211	0.195	0.140	0.875	1.125	0.278
3/8	0.375	0.375	0.369	9/16	0.562	0.551	0.650	0.628	15/64	0.243	0.226	0.160	1.000	1.250	0.312
7/16	0.4375	0.4375	0.4305	5/8	0.625	0.612	0.722	0.698	9/32	0.291	0.272	0.195	1.125	1.375	0.357
1/2	0.5	0.5	0.493	3/4	0.750	0.736	0.866	0.840	5/16	0.323	0.302	0.215	1.250	1.500	0.385
9/16	0.5625	0.5625	0.5545	13/16	0.812	0.798	0.938	0.910	23/64	0.371	0.348	0.250	1.375	1.625	0.417
5/8	0.625	0.625	0.617	15/16	0.938	0.922	1.083	1.051	25/64	0.403	0.378	0.269	1.500	1.750	0.455
3/4	0.75	0.75	0.741	1-1/8	1.125	1.100	1.299	1.254	15/32	0.483	0.455	0.324	1.750	2.000	0.500
7/8	0.875	0.875	0.866	1-5/16	1.312	1.285	1.516	1.465	35/64	0.563	0.531	0.378	2.000	2.250	0.556
1	1	1	0.99	1-1/2	1.500	1.469	1.732	1.675	39/64	0.627	0.591	0.416	2.250	2.500	0.625
1-1/8	1.125	1.125	1.114	1-11/16	1.688	1.631	1.949	1.859	11/16	0.718	0.658	0.461	2.500	2.750	0.714
1-1/4	1.25	1.25	1.239	1-7/8	1.875	1.812	2.165	2.066	25/32	0.813	0.749	0.530	2.750	3.000	0.714
1-1/2	1.5	1.5	1.488	2-1/4	2.250	2.175	2.598	2.480	15/16	0.974	0.902	0.640	3.250	3.500	0.833

Check available Sizes of ASME SB 166 Inconel 718 Stud Bolt, Ask For Ready Stock of UNS N07718 Fasteners in Mumbai, India.

BAGODA

Quick Contact

Call Us

+91 22 - 66151721

Need Help? Send us Email

sales@bagodasteelproject.com

Inconel 718 Washer Weight & Dimensions

Bolt Size	A	B	C	Weight (lbs.) Per 100 Pieces
Bolt Size	ID	OD	Thickness	Weight (lbs.) Per 100 Pieces
1/2	9/16	13/8	0.109	4
5/8	11/16	13/4	0.134	8
3/4	13/16	2	0.148	11
7/8	15/16	21/4	0.165	15
1	11/16	21/2	0.165	19
11/8	11/4	23/4	0.165	22
11/4	13/8	3	0.165	26
13/8	11/2	31/4	0.180	33
11/2	15/8	31/2	0.180	38
15/8	13/4	33/4	0.180	43
13/4	17/8	4	0.180	50
17/8	2	41/4	0.180	57
2	21/8	41/2	0.180	63
21/4	23/8	43/4	0.220	83
21/2	25/8	5	0.238	96
23/4	27/8	51/4	0.259	110
3	31/8	51/2	0.284	130

Inconel 718 Stud Bolt Size Chart

Class 150 Flanges ASME B16.5 (Stud bolt sizes)						Length of Stud Bolts
NPS	Outside Diameter of Flange	The diameter of Bolt Circle	The diameter of Bolt Holes	Number of Bolts	Diameter of Bolts	Raised Face 0.06 in	Ring Joint
1/2	3 1/2	2 3/8	5/8	4	1/2	2 1/4	–
3/4	3 7/8	2 3/4	5/8	4	1/2	2 1/2	–
1	4 1/4	3 1/8	5/8	4	1/2	2 1/2	3
1 1/4	4 5/8	3 1/2	5/8	4	1/2	2 3/4	3 1/4
1 1/2	5	3 7/8	5/8	4	1/2	2 3/4	3 1/4
2	6	4 3/4	3/4	4	5/8	3 1/4	3 3/4
2 1/2	7	5 1/2	3/4	4	5/8	3 1/2	4
3	7 1/2	6	3/4	4	5/8	3 1/2	4
3 1/2	8 1/2	7	3/4	8	5/8	3 1/2	4
4	9	7 1/2	3/4	8	5/8	3 1/2	4
5	10	8 1/2	7/8	8	3/4	3 3/4	4 1/4
6	11	9 1/2	7/8	8	3/4	4	4 1/2
8	13 1/2	11 3/4	7/8	8	3/4	4 1/4	4 3/4
10	16	14 3/4	1	12	7/8	4 1/2	5
12	19	17	1	12	7/8	4 3/4	5 1/4
14	21	18 3/4	1 1/8	12	1	5 1/4	5 3/4
16	23 1/2	21 1/4	1 1/8	16	1	5 1/4	5 3/4
18	25	22 3/4	1 1/4	16	1 1/8	5 3/4	6 1/4
20	27 1/2	25	1 1/4	20	1 1/8	6 1/4	6 3/4
24	32	29 1/2	1 1/4	20	1 1/4	6 3/4	7 1/4
Class 300 Flanges ASME B16.5						Length of Stud Bolts
NPS	Outside Diameter of Flange	The diameter of Bolt Circle	The diameter of Bolt Holes	Number of Bolts	Diameter of Bolts	Raised Face 0.06 in	Ring Joint
1/2	3 3/4	2 5/8	5/8	4	1/2	2 1/2	3
3/4	4 5/8	3 1/4	3/4	4	5/8	3	3 1/2
1	4 7/8	3 1/2	3/4	4	5/8	3	3 1/2
1 1/4	5 1/4	3 7/8	3/4	4	5/8	3 1/4	3 3/4
1 1/2	6 1/8	4 1/2	7/8	4	3/4	3 1/2	4
2	6 1/2	5	3/4	8	5/8	3 1/2	4
2 1/2	7 1/2	5 7/8	7/8	8	3/4	4	4 1/2
3	8 1/4	6 5/8	7/8	8	3/4	4 1/4	4 3/4
3 1/2	9	7 1/4	7/8	8	3/4	4 1/4	5
4	10	7 7/8	7/8	8	3/4	4 1/2	5
5	11	9 1/4	7/8	8	3/4	4 3/4	5 1/4
6	12 1/2	10 5/8	7/8	12	3/4	4 3/4	5 1/2
8	15	13	1	12	7/8	5 1/2	6
10	17 1/2	15 1/4	1 1/8	16	1	6 1/4	6 3/4
12	20 1/2	17 3/4	1 1/4	16	1 1/8	6 3/4	7 1/4
14	23	20 1/4	1 1/4	20	1 1/8	7	7 1/2
16	25 1/2	22 1/2	1 3/8	20	1 1/4	7 1/2	8
18	28	24 3/4	1 3/8	24	1 1/4	7 3/4	8 1/4
20	30 1/2	27	1 3/8	24	1 1/4	8	8 3/4
24	36	32	1 5/8	24	1 1/2	9	10

Ready Stock Inconel 718 Fasteners

Inconel 718 Tooth Lock Washer In Indonesia
ASTM B637 Inconel 718 Nyloc Nuts
Inconel 718 Heavy Hex Nuts In Malaysia
Inconel Alloy 718 Socket Cap Screw In Mexico
2.4668 Fasteners
Alloy 718 Elevator Bolt
Nickel Alloy 718 Screws Distributor
Alloy 718 T-Head Bolts
718 Inconel Customized Washer
Inconel Alloy 718 Threaded Rod
Inconel 718 Fasteners In Philippines
Nickel Alloy 718 Split / Lock Washer
Inconel® Alloy 718 Tie Rods
DIN 2.4668 Countersunk Washer
Inconel 718 Dock Washer Stockholder
Inconel® Alloy 718 Foundation Bolts Manufacturer
Inconel 718 Hex Head Bolts In Japan
Inconel 718 Heavy Hex Bolts In Italy
Inconel 718 Flange Bolt
ASTM B637 Inconel 718 Fasteners
JIS NCF 718 Stud Bolts
Inconel 718 Self Locking Nuts
Inconel 718 Anchor Bolts
ASME SB637 Inconel 718 Fender Washer
Inconel® Alloy 718 Hex Washers
Inconel Alloy 718 Carriage Bolt Stockist
Inconel 718 Square Nuts In Spain
Alloy 718 Eye Bolts In Kuwait
Inconel 718 Lock Nut
Nickel Alloy 718 Hex Domed Cap Nuts
718 Inconel Ogee Washer
Nickel Alloy 718 Hex Coupling Nut
Inconel Alloy 718 Bolts In Kuwait
Inconel 718 Machine Fasteners Exporter
Alloy 718 Hex Head Bolt In Spain
Nickel Alloy 718 Concrete Screw
Alloy 718 Hexagonal Washer In Singapore
Inconel 718 Bolts In Indonesia
718 Inconel Machine Bolt
Alloy 718 Double Ended Stud
ASTM B637 Inconel 718 Wing Nuts
Inconel Alloy® 718 Washers In Mexico
718 Inconel Structural Bolts
Inconel 718 Wing Nuts In Malaysia
ASTM B637 Inconel 718 Flat Washers
UNS N07718 Fasteners
Inconel® Alloy 718 Allen Cap Screw In Philippines
718 Inconel Hex Set Screw Manufacturer
Inconel Alloy 718 Stud Bolts
Inconel 718 Coupling Nut In Japan
Alloy 718 Plain Washer Supplier in Mumbai
718 Inconel Acorn Nuts In Italy

Inconel 718 Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 718	0.08 max	0.35 max	0.35 max	0.015 max	0.30 max	-	50.00 - 55.00	17.00 - 21.00

Alloy 718 Fasteners Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 718	8.2 g/cm3	1350 °C (2460 °F)	Psi – 1,35,000 , MPa – 930	Psi – 75,000 , MPa – 482	45 %

Inconel 718 Fasteners

Inconel Alloy 718 Fasteners, Inconel 718 Bolts In Indonesia, Inconel® Alloy 718 Stud Bolts, ASTM B637 Inconel 718 Washers, Alloy 718 Nuts Price in India.