• Shop No 6 , 23/A C.P Tank Road, Mumbai 400004.
  • Talk With Our Experts +91 9011334411

Duplex Steel S31803 Hex Bolts

Duplex Stainless Steel S32205 Hex Bolts, Duplex 2205 Hexagonal Bolt, Duplex Steel UNS S31803 Heavy Hex Bolt, DSS S32205 Hex Bolts, Duplex S31803 Hex Head Bolt Price in India.

Bagoda Steel is a renowned manufacturer and trader of Duplex UNS S31803 Hex Bolts, whichis machinable in each the wrought and solid form. Furnace rolls manufactured from this alloy had been nevertheless in precise circumstance after working for 8700 hours at 2150 Deg. F. Furnace trays, used to help heavy loads, were uncovered to temperatures as much as 2300 Deg. F. in an oxidizing environment without bending or warping. Duplex Steel UNS S32205 Hex Bolts is similarly appropriate to be used in jet engine tailpipes, afterburner additives, turbine blades, nozzle vanes, cabin heaters, and different plane parts. It is also used in Gas turbine combustion cans and ducting, heat-treating system. They are provided withinside the answer heat-dealt with circumstance until in any other case specified.

Industrial Product
Duplex Steel S31803 Hex Bolts

1.4462 Hex Bolts, Duplex S32205 Hex Head Shoulder Bolt, Duplex Steel UNS S32205 Machine Hex Bolt, SAF 2205 Hex Flange Bolt, DSS S31803 Hex Bolt Stockist, DSS S31803 Hex Cap Screw, Duplex Stainless Steel S31803 Industrial Hex Bolt, UNS S31803 Full Threaded Hex Bolt Supplier in Mumbai, India.

+91 22 - 66151721
sales@bagodasteelproject.com
+91 9011334411

It has extensive use in fueloline turbine engines for combustion area additives together with transition duct, combustor cans, spray bars and flame holders in addition to in afterburners, tailpipes and cabin heaters. It is suggested to be used in commercial furnace applications as it has uncommon resistance to oxidizing, lowering and impartial atmospheres. Duplex Steel 2205 Hex Bolts is likewise used withinthe chemical procedure enterprise for retorts, muffles, catalyst help grids, furnace baffles, tubing for pyrolysis operations and flash drier additives.Care ought to be taken to ensure there are inflexible device setup and sharp equipment, so that work hardening and floor glazing do now no longer occur.

Low reducing speeds and a sufficient float of coolant are required.High-pace metallic drills must be floor to a covered attitude of one hundred thirty five to one hundred forty deg. with a clearance attitude. The net must be thinned right all the way down to approximately the net-thickness of a well-known drill.Better finishes of these Alloy 2205 Hex Bolts may be received via way of means of growing the rate and lowering the feed. Automatic screw machines aren't endorsed due to the fact speeds are usually immoderate and carbide-tipped equipment will now no longer preserve up. A sulphur-base reducing fluid must be used for machining this alloy.

Material Specification Chart of Duplex Steel S31803 Hex Bolts

Standard DIN 933, DIN 931, DIN-EN14399-4, DIN 601, ISO 4016, IS1364, ISO 4014, ISO 4017, BS 1768, BS 1083, ASME B18.2.1, JIS B1180, DIN 558, ISO 4018, CSN 21301, EU 24016, DIN 7968, DIN7990
Manufacturing Method
  • Cold Forming Hex Bolt: M2 to M24
  • Hot Forging Hex Bolt: M24 to M100
Metric Sizes
  • Dia: M10 – M110
  • Length: 12 – 1200MM
Length 3 mm to 200 mm or custom
US Threads METRIC, BSW, BSF, Unified national coarse (UNC), Unified national fine (UNF), Unified national extra fine (UNEF), UNJC and UNJF threads, UNK threads, UNR threads, Constant-pitch threads
UTS – Unified Thread Standard UNC, UNF, NPT, UNS, UNEF, NPTF
Heads and drive style Phillips/ Slot, Phillips, indented hex head, Oval, Pan, Flat 82 degree, Round, flat undercut, Truss, binding, flat head 100 degree, Slotted, fillister head, Six-Lobe
Manufacturing process Wire Drawing, Insert tapping, Cold Heading, Heat Treatment, Inspection, Surface Plating, Packing
Standard
  • ANSI B 28.2.4 1M/ B 18.2.4 2M
  • ANSI – American National Standards Institute
  • GB/T5783, GB/T5782, GB5783
  • American ASME
  • Indian IS
  • International ISO
  • American SAE
  • German DIN
  • Spanish CSN
  • British BS
  • Italian UNI
  • Polish PN
  • European EU
Surface Coating
  • Ptfe Coated Hex Bolts
  • Hot Dipped Galvanized
  • Phosphate
  • Teflon
  • Xylon
  • Zinc Phosphate
  • Manganese Phosphate
  • Zinc Electro Plating (Hexavalent or Trivalent Chrome)
  • ZAC (Zinc Alluminium Flake Coating)
  • Cadmium
Surface treatment
  • Polish
  • Passivation
  • Black oxide coating
  • Anodizing
  • Sand blasting
  • Rust preventive oil
  • Heat-disposing
  • Hot dip galvanized
  • Electroplating color
Test Certificates
  • EN 10204 / 3.1 MTC
  • ISO 898-1, ISO 898-2,
  • EN 14399-10
  • EN 14399-2
  • ISO 148-1, ISO 6508-1
ISO – International Organization for Standardization
  • ISO 4014
  • ISO 4017
  • ISO 4032
  • ISO 4162
  • ISO 4161

Various Types Of Duplex Steel S31803 Hex Bolts

Duplex Steel S31803 Hex Head Bolt
Duplex Steel S31803 Hex Head Bolt
  • UNS S32205 Hex Head Bolts
  • Duplex Steel S31803 Hex Socket Head Bolt
  • Duplex S32205 Hex Head Bolt
  • 1.4462 Hex Head Bolts
  • DSS S31803 Hex Head Bolt
Duplex Steel S31803 Heavy Hex Bolts
Duplex Steel S31803 Heavy Hex Bolt
  • DSS S32205 Heavy Hex Bolts
  • Duplex Stainless Steel UNS S32205 Heavy Hex Bolts
  • 1.4462 Heavy Hex Bolts
  • UNS S31803 Heavy Hex Bolts
  • Duplex Steel UNS S31803 Heavy Hex Bolts
Duplex Steel S31803 Hex Flange Bolts
Duplex Steel S31803 Hex Flange Bolt
  • 1.4462 Hex Flange Bolts
  • UNS S31803 Hex Flange Bolt
  • Duplex Steel UNS S32205 Hex Flange Bolt
  • Duplex S32205 Flange Hex Bolts
  • DSS S31803 Hex Flange Bolt
Duplex Steel S31803 Slotted Hex Bolts
Duplex Steel S31803 Slotted Hex Bolt
  • UNS S32205 Slotted Hex Bolts
  • Duplex S32205 Slotted Hex Bolts
  • Duple Stainless Steel UNS S31803 Slotted Hex Bolts
  • 1.4462 Beveled Slotted Hex Bolt
  • DSS S31803 Slotted Hex Bolt
Duplex Steel S31803 Full Threaded Hex Bolt
Duplex Steel S31803 Full Threaded Hex Bolt
  • DSS S31803 Full Threaded Hex Bolt
  • Duplex Stainless Steel S31803 Full Threaded Hex Bolt
  • UNS S32205 Fully Threaded Hex Bolts
  • 1.4462 Fully Threaded Hex Bolt
  • SAF 2205 Full Threaded Hex Bolt
Duplex Steel S31803 Half Threaded Hex Bolts
Duplex Steel S31803 Half Threaded Hex Bolt
  • Duplex S32205 Half Threaded Hex Bolts
  • Duplex Stainless Steel S31803 Half Threaded Hex Bolts
  • 1.4462 Half Threaded Hex Bolts
  • UNS S32205 Half Threaded Hex Bolts
  • DSS S31803 Half Threaded Hex Bolts

Equivalent Grades of Duplex Steel S31803 Hex Bolts

STANDARD WERKSTOFF NR. UNS
Duplex 2205 1.4462 S31803
Hex Bolts Dimensions

View Size Table Of Duplex Steel UNS S31803 Hex Bolts, We have Global sales network for Duplex Stainless Steel S31803 Heavy Hex Bolts, Wide Stockist Of Werkstoff No 1.4462 Hex Head Bolts, Industrial Hex Bolts In India.

Dimensions of Duplex Steel S31803 Hex Bolts

Nominal Size or Basic
Product Diameter		 E F G H R LT
Full-size Body Diameter Width Across Flats Width Across Corners Height Radius of Fillet Nominal Thread Length for
Bolt Lengths
6 in. and
Shorter		 Over
6 in.
Max. Min. Basic Max. Min. Max. Min. Basic Max. Min. Max. Min.
1/4 0.2500 0.260 0.237 7/16 0.438 0.425 0.505 0.484 11/64 0.188 0.150 0.03 0.01 0.750 1.000
5/16 0.3125 0.324 0.298 1/2 0.500 0.484 0.577 0.552 7/32 0.235 0.195 0.03 0.01 0.875 1.125
3/8 0.3750 0.388 0.360 9/16 0.562 0.544 0.650 0.620 1/4 0.268 0.226 0.03 0.01 1.000 1.250
1/2 0.4375 0.452 0.421 5/8 0.625 0.603 0.722 0.687 19/64 0.316 0.272 0.03 0.01 1.125 1.375
1/2 0.5000 0.515 0.482 3/4 0.750 0.725 0.866 0.826 11/32 0.364 0.302 0.03 0.01 1.250 1.500
5/8 0.6250 0.642 0.605 15/16 0.938 0.906 1.083 1.033 27/64 0.444 0.378 0.06 0.02 1.500 1.750
3/4 0.7500 0.768 0.729 1-1/8 1.125 1.088 1.299 1.240 1/2 0.524 0.455 0.06 0.02 1.750 2.000
7/8 0.8750 0.895 0.852 1-5/16 1.312 1.269 1.516 1.447 37/64 0.604 0.531 0.06 0.02 2.000 2.250
1 1.0000 1.022 0.976 1-1/2 1.500 1.450 1.732 1.653 43/64 0.700 0.591 0.09 0.03 2.250 2.500
1-1/8 1.1250 1.149 1.098 1-11/16 1.688 1.631 1.949 1.859 3/4 0.780 0.658 0.09 0.03 2.500 2.750
1-1/4 1.2500 1.277 1.223 1-7/8 1.875 1.812 2.165 2.066 27/32 0.876 0.749 0.09 0.03 2.750 3.000
1-3/8 1.3750 1.404 1.345 2-1/16 2.062 1.994 2.382 2.273 29/32 0.940 0.810 0.09 0.03 3.000 3.250
1-1/2 1.5000 1.531 1.470 2-1/4 2.250 2.175 2.598 2.480 1 1.036 0.902 0.09 0.03 3.250 3.500
1-5/8 1.6250 1.658 1.591 2-7/16 2.438 2.356 2.815 2.616 1-3/32 1.116 0.978 0.09 0.03 3.500 3.750
1-3/4 1.7500 1.785 1.716 2-5/8 2.625 2.538 3.031 2.893 1-5/32 1.196 1.054 0.12 0.04 3.750 4.000
1-7/8 1.8750 1.912 1.839 2-13/16 2.812 2.719 3.248 3.099 1-1/4 1.276 1.130 0.12 0.04 4.000 4.250
2 2.0000 2.039 1.964 3 3.000 2.900 3.464 3.306 1-11/32 1.388 1.175 0.12 0.04 4.250 4.500
2-1/4 2.2500 2.305 2.214 3-3/8 3.375 3.262 3.897 3.719 1-1/2 1.548 1.327 0.19 0.06 4.750 5.000
2-1/2 2.5000 2.559 2.461 3-3/4 3.750 3.625 4.330 4.133 1-21/32 1.708 1.479 0.19 0.06 5.250 5.500
2-3/4 2.7500 2.827 2.711 4-1/8 4.125 3.988 4.763 4.546 1-13/16 1.869 1.632 0.19 0.06 5.750 6.000
3 3.0000 3.081 2.961 4-1/2 4.500 4.350 5.196 4.959 2 2.060 1.815 0.19 0.06 6.250 6.500
3-1/4 3.2500 3.335 3.210 4-7/8 4.875 4.712 5.629 5.372 2-3/16 2.251 1.936 0.19 0.06 6.750 7.000
3-1/2 3.5000 3.589 3.461 5-1/4 5.250 5.075 6.062 5.786 2-5/16 2.380 2.057 0.19 0.06 7.250 7.500
3-3/4 3.7500 3.858 3.726 5-5/8 5.625 5.437 6.495 6.198 2-1/2 2.572 2.241 0.19 0.06 7.750 8.000
4 4.0000 4.111 3.975 6 6.000 5.800 6.928 6.612 2-11/16 2.764 2.424 0.19 0.06 8.250 8.500

Dimensions of Duplex Steel S31803 Heavy Hex Bolts

Nominal Size
or Basic
Product Diameter		 E F G H R LT
Full-size Body
Diameter		 Width Across Flats Width Across
Corners		 Head Height Radius of Fillet Nominal Thread
Length for
Screw Lengths
6 in.
and
Shorter		 Over 6
in.
Max. Min. Basic Max. Min. Max. Min. Basic Max. Min. Max. Min. Nom. Nom.
3/8 0.3750 0.388 0.360 11/16 0.688 0.669 0.794 0.763 1/4 0.268 0.226 0.03 0.01 1.000 1.250
1/2 0.5000 0.515 0.482 7/8 0.875 0.850 1.010 0.969 11/32 0.364 0.302 0.03 0.01 1.250 1.500
5/8 0.6250 0.642 0.605 1-1/16 1.062 1.031 1.227 1.175 27/64 0.444 0.378 0.06 0.02 1.500 1.750
3/4 0.7500 0.768 0.729 1-1/4 1.250 1.212 1.443 1.383 1/2 0.524 0.455 0.06 0.02 1.750 2.000
7/8 0.8750 0.895 0.852 1-7/16 1.438 1.394 1.660 1.589 37/64 0.604 0.531 0.06 0.02 2.000 2.250
1 1.0000 1.022 0.976 1-5/8 1.625 1.575 1.876 1.796 43/64 0.700 0.591 0.09 0.03 2.250 2.500
1-1/8 1.1250 1.149 1.098 1-13/16 1.812 1.756 2.093 2.002 3/4 0.780 0.658 0.09 0.03 2.500 2.750
1-1/4 1.2500 1.277 1.223 2 2.000 1.938 2.309 2.209 27/32 0.876 0.749 0.09 0.03 2.750 3.000
1-3/8 1.3750 1.404 1.345 2-3/16 2.188 2.119 2.526 2.416 29/32 0.940 0.810 0.09 0.03 3.000 3.250
1-1/2 1.5000 1.531 1.470 2-3/8 2.375 2.300 2.742 2.622 1 1.036 0.902 0.09 0.03 3.250 3.500
1-5/8 1.6250 1.658 1.591 2-9/16 2.562 2.481 2.959 2.829 1-3/32 1.116 0.978 0.09 0.03 3.500 3.750
1-3/4 1.7500 1.785 1.716 2-3/4 2.750 2.662 3.175 3.035 1-5/32 1.196 1.054 0.12 0.04 3.750 4.000
1-7/8 1.8750 1.912 1.839 2-15/16 2.938 2.844 3.392 3.242 1-1/4 1.276 1.130 0.12 0.04 4.000 4.250
2 2.0000 2.039 1.964 3-1/8 3.125 3.025 3.608 3.449 1-11/32 1.388 1.175 0.12 0.04 4.250 4.500
2-1/4 2.2500 2.305 2.214 3-1/2 3.500 3.388 4.041 3.862 1-1/2 1.548 1.327 0.19 0.06 4.750 5.000
2-1/2 2.5000 2.559 2.461 3-7/8 3.875 3.750 4.474 4.275 1-21/32 1.708 1.479 0.19 0.06 5.250 5.500
2-3/4 2.7500 2.827 2.711 4-1/4 4.250 4.112 4.907 4.688 1-13/16 1.869 1.632 0.19 0.06 5.750 6.000
3 3.0000 3.081 2.961 4-5/8 4.625 4.475 5.340 5.102 2 2.060 1.815 0.19 0.06 6.250 6.500

Check available Sizes of Duplex Steel S31803 Hex Bolts, Ask For Ready Stock of UNS S32205 Heavy Hex Bolts in Mumbai, India.

BAGODA

Quick Contact

Dimensions of Duplex Steel S31803 Heavy Hex Structural Bolt

Bolt Size A B C D E
Radius of Fillet		 F
Thread Length		 G
Transitional
Thread Length		 Runout of
Bearing Surface
FIM
max min min max min max
1/2″ 0.515 0.482 7/8 0.969 5/16 0.031 0.009 1.00 0.19 0.016
5/8″ 0.642 0.605 1-1/16 1.175 25/64 0.062 0.021 1.25 0.22 0.019
3/4″ 0.768 0.729 1-1/4 1.383 15/32 0.062 0.021 1.38 0.25 0.022
7/8″ 0.895 0.852 1-7/16 1.589 35/64 0.062 0.031 1.50 0.28 0.025
1″ 1.022 0.976 1-5/8 1.796 39/64 0.093 0.062 1.75 0.31 0.028
1-1/8″ 1.149 1.098 1-13/16 2.002 11/16 0.093 0.062 2.00 0.34 0.032
1-1/4″ 1.277 1.223 2 2.209 25/32 0.093 0.062 2.00 0.38 0.035
1-3/8″ 1.404 1.345 2-3/16 2.416 27/32 0.093 0.062 2.25 0.44 0.038
1-1/2″ 1.531 1.470 2-3/8 2.622 15/16 0.093 0.062 2.25 0.44 0.041

Weight Chart Of Duplex Stainless Steel S31803 Hex Bolts

THREADS According to IS 1363/67
APPROX. WEIGHT IN KGS FOR 100 NOS
LENGTH in mm DIAMETER (METRIC)
M5 M6 M12 M8 M10 M16 M14 M20 M18 M22
16 0.448 0.743 1.590 3.211
20 0.598 0.812 4.892 1.711 3.411
25 0.660 0.897 5.252 1.871 3.660 8.170
30 0.737 1.010 5.574 2.070 3.912 10.707 9.690 18.657
35 0.804 1.120 5.974 2.271 4.223 11.416 10.000 19.608 16.026
40 0.881 1.230 6.410 2.470 4.533 12.107 10.288 20.747 16.667
45 0.958 1.340 6.859 2.671 4.840 12.821 10.504 21.739 17.241
50 1.030 1.450 7.299 2.870 5.155 13.624 11.261 22.727 17.857 28.409
55 1.560 7.740 3.071 5.464 14.409 11.628 23.810 18.868 30.120
60 1.670 8.183 3.270 5.774 15.244 12.255 25.126 20.000 32.051
65 1.781 8.621 3.472 6.083 16.026 12.626 26.455 21.008 34.014
70 1.890 9.058 3.671 6.394 16.835 12.987 27.778 22.124 35.461
75 2.000 9.506 3.873 6.702 17.606 13.228 29.070 23.256 39.063
80 2.111 10.000 4.072 7.013 18.248 13.889 30.303 24.510 40.000
90 10.917 4.472 7.634 19.841 14.925 33.113 26.042 41.667
100 11.820 4.873 8.251 21.459 16.340 35.714 27.778 46.296
110 12.723 8.881 23.041 17.730 38.168 31.250 47.170
120 13.624 9.506 24.631 18.797 40.984 32.895 50.000
130 14.535 10.101 26.316 20.000 43.478 34.722 52.632
140 15.432 10.707 27.933 20.833 46.296 35.461 55.556
150 16.340 11.312 29.412 22.222 48.544 37.594 58.824
160 17.241 11.905 31.056 24.272 50.505 40.984 61.728
170 18.116 12.500 32.680 53.191 64.935
180 19.011 13.123 34.247 26.882 55.556 67.568
190 19.920 13.736 35.971 58.140 70.423
200 20.833 14.327 37.594 29.586 60.976 49.020 73.529
220 22.624 15.528 40.650 65.789 79.365
240 24.510 16.722 43.860 71.429 84.746
250 25.381 17.301 45.455 74.627 87.719
260 26.316 17.921 47.170 76.923 90.909
280 28.090 19.157 50.505 81.967 98.039
300 29.940 20.325 53.763 87.719 104.167
320 31.646 56.818 92.593
340 33.557 60.241 98.039
360 35.211 63.291 104.167
380 37.037 66.667 108.696
400 39.063 69.444 113.636

Ready Stock Duplex Steel S31803 Hex Bolts

  • Duplex S31803 Full Threaded Hex Bolt
  • Duplex Steel S32205 Heavy Hex Structural Bolt
  • SAF 2205 Hex Bolts
  • Duplex 2205 Metric Hex Bolts
  • Duplex Steel S31803 Hex Machine Bolt Stockist
  • Duplex S32205 Slotted Hex Bolts
  • Duplex Steel S31803 Hex Structural Bolts
  • Duplex S31803 Heavy Hex Bolts
  • Duplex S31803 Threaded Hex Bolts
  • Duplex S32205 Half Threaded Hex Bolt
  • Duplex S31803 Hex Tap Bolts
  • Duplex Steel S32205 Flanged Hex Bolts Stockholder
  • Duplex Steel S31803 Hexagon Bolts
  • DSS S31803 Heavy Hex Bolts
  • Duplex Steel S31803 Half Threaded Hex Bolt
  • Hastelloy Alloy B2 Hex Head Bolt
  • DSS S32205 Socket Head Cap Screw
  • Duplex S32205 Slotted Hex Bolts
  • Duplex Steel S31803 Hexagon Bolt Supplier in Mumbai
  • DSS S32205 Hexagon Screw Head Bolt
  • DIN 1.4462 Hex Bolts
  • Duplex Steel S31803 Industrial Hex Bolts Exporter
  • Duplex Steel S31803 Hex Bolt Manufacturer
  • Duplex S32205 Self Sealing Hex Bolts
  • Duplex Stainless Steel S31803 Hex Cap Screw
  • Duplex Steel S31803 Fully Threaded Hex Bolt
  • JIS NW 6022 Heavy Hex Bolts
  • DSS S31803 Hex Flange Bolt
  • Duplex Steel S32205 Industrial Hex Bolts
  • 1.4462 Hex Machine Bolt
  • Duplex S32205 Hex Socket Bolts Distributor
  • UNS S32205 Hex Bolts
  • SAF 2205 Hex Bolts Manufacturer
  • Duplex Steel S31803 Hex Head Shoulder Bolt
  • DSS S31803 High Tensile Hex Bolts
  • Duplex S31803 Hex Head Shoulder Bolts

Duplex Stainless Steel S31803 Hex Bolts Chemical Composition

Grade C Mn Si P S Cr Mo Ni N Fe
S31803 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 22.0 – 23.0 3.0 – 3.5 4.50 – 6.50 0.14 – 0.20 63.72 min

DSS S31803 Hex Bolts Mechanical Properties

Tensile Strength, ksi 0.2% Yield Strength, ksi Elongation, % Hardness [HRC]
90 min 65 min 25 min 293 max

Export Destinations For Duplex Steel S31803 Hex Bolts

industry