Titanium Gr 5 Fasteners, Titanium Gr 5 Bolts, Grade 2 Titanium Nuts Manufacturer

Titanium Gr 5 Flat Washers, Titanium Alloy Gr 5 Threaded Rod In Indonesia, Titanium Gr 5 Hex Bolts In Singapore, UNS N56400 Allen Cap Screw, Titanium Gr 5 Anchor Bolts, 3.7165 Nuts, Ti Alloy Grade 5 Carriage Bolts Stockist, Titanium Gr 5 Screws Supplier in Mumbai, India.

The resistance of this movie to corrosion relies upon the chemical composition of the chrome steel, mainly the chromium content material. Titanium WNR 3.7165 Fasteners is standard to differentiate among varieties of corrosion: uniform, localized (pitting), galvanic, and SCC (strain corrosion cracking). Any of these varieties of corrosion can arise while the grade of chrome steel isn't suitable for the working surroundings. Uniform corrosion takes area in very competitive environments, commonly wherein chemical substances are produced or closely used, including within the pulp and paper industries.

Whether chrome steel corrodes relies upon on the sort and awareness of acid or base and the answer temperature. Uniform corrosion is commonly smooth to keep away from due to tremendous posted corrosion statistics or easily-executed laboratory corrosion testing. Acidic solutions may be placed into well-known categories: lowering acids, including hydrochloric acid and dilute sulfuric acid, and oxidizing acids, including nitric acid and focused sulfuric acid. Increasing chromium and molybdenum content material in Alloy Ti 6Al/4V Fasteners gives improved resistance to lowering acids at the same time as growing chromium and silicon content material gives improved resistance to oxidizing acids.

Material Specification Chart of Titanium Gr 5 Fasteners

Standard	ASTM B348, ASME SB348
Size	M 02 to M 33
Length	3 mm to 200 mm
Threads:	METRIC, BSW, BSF, UNC, UNF or as required
Standard:	DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute ANSI B 18.2.4 2M ANSI B 28.2.4 1M Stud Bolt length are defined in ASME B16.5 standard Hex nuts are defined in ASME B18.2.2 ASME B18.5 BS en iso 3506 DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards
Scope of Manufacturer	Up to M36 / 1-1/2” Dia, up to 1100mm lg CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia	M6 to M64 (1/4" - 2.5")
Length	12 MM - 500 MM (Upto 20 Inch)
IS	1363, 1364
DIN	931, 933
ISO	ISO 3506
Form of:	Hex, Square, Round, Threading as per Gauge Etc.
Head Drive:	Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate:	Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing:	Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production Process	M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Types	Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts

ANSI and/or ASME Standards (inch series)

ASME B18.1.1	Small Solid Rivets	ASME B18.8.1	Clevis Pins and Cotter Pins
ASME B18.1.2	Large Rivets	ASME B18.8.2	Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1	Square and Hex Bolts and Screws	ASME B18.9	Plow Bolts
ASME B18.2.2	Square and Hex Nuts	ASME B18.10	Track Bolts and Nuts
ASME B18.2.6	Fasteners for use in Structural Applications	ASME B18.11	Miniature Screws
ASME B18.3	Socket Cap, Shoulder and Set Screws	ASME B18.13	Screws and Washer Assemblies (Sems)
ASME B18.5	Round Head Bolts	ASME B18.15	Forged Eyebolts
ASME B18.6.2	Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws	ASME B18.17	Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3	Machine Screws and Machine Screws Nuts	ASME B18.21.1	Lock Washers
ASME B18.6.4	Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws	ASME B18.22.1	Plain Washers
ASME B18.7	General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps	ASME B18.23.1	Beveled Washers

Various Types Of Titanium Gr 5 Fasteners

Titanium Gr 5 Bolts

Titanium Gr 5 Bolts In Indonesia
Alloy Titanium Hex Bolts In Malaysia
ASTM B348 Titanium Gr 5 Bolts
ASME SB348 Grade 5 Titanium Bolts
UNS N56400 Flange Bolts
3.7165 Heavy Hex Bolts

Titanium Gr 5 Nuts

ASME SB348 Titanium Gr 5 Nuts
ASTM B348 Alloy Titanium Nuts
UNS N56400 Nuts
3.7165 Heavy Hex Nuts
Titanium Gr 5 Wing Nuts In Philippines
Titanium Hex Nuts In Mexico

Titanium Gr 5 Screw

3.7165 Hex Cap Screws
Titanium Gr 5 Allen Cap Screw In Japan
UNS N56400 Socket Set Screws
ASTM B348 Grade 5 Titanium Screw
Titanium Gr 5 Screw In Italy
ASME SB348 Ti Gr 5 Screw

Titanium Gr 5 Washers

ASTM B348 Titanium Gr 5 Washers
Titanium Gr 5 Flat Washer In Spain
Alloy Titanium Washers In Kuwait
ASME SB348 Ti Alloy Grade 5 Washers
3.7165 Beveled Washers
UNS N56400 Lock Washers

Titanium Gr 5 Threaded Rods

ASTM B348 Ti Alloy Grade 5 Threaded Rods
3.7165 Threaded Rods
UNS N56400 Threaded Rods
Grade 5 Titanium Threaded Rods In Indonesia
ASME SB348 Titanium Gr 5 Threaded Rods
Titanium Gr 5 Threaded Rods In Singapore

Titanium Gr 5 Stud Bolts

ASME SB348 Titanium Gr 5 Stud
3.7165 Stud Bolts
Titanium Gr 5 Stud Bolts In Malaysia
ASTM B348 Alloy Titanium Stud Bolts
Titanium Alloy Gr 5 Tie Rods In Kuwait
UNS N56400 Stud Bolts

Titanium Gr 5 Anchor Bolts

Ti Alloy Grade 5 Wedge Anchor Bolt In Spain
UNS N56400 Concrete Anchors
Titanium Gr 5 Anchor Bolts In Mexico
ASTM B348 Ti Gr 5 Anchor Bolts
ASME SB348 Titanium Gr 5 Self Tapping Anchor
3.7165 J Anchor Bolts

Equivalent Grades of Titanium Gr 5 Fasteners

STANDARD	WERKSTOFF NR.	UNS
Gr 5	3.7165	R56400

View Size Table Of Titanium Gr 5 Fasteners, We have Global sales network for Alloy Titanium Stud Bolts, Wide Stockist Of Werkstoff No 3.7165 Nuts, Bolts, Washers In India.

Size Chart of Titanium Gr 5 Bolts

Nominal or Basic Product Diameter		E		F			G		H			J	LT (Thread Length)		Y
Nominal or Basic Product Diameter		Body Diameter		Width Across Flats			Width Across Corners		Head Height			Wrenching Height	For Screw Lengths	For Screw Lengths	Transition Thread Length
1/4	0.25	0.25	0.245	7/16	0.438	0.428	0.505	0.488	5/32	0.163	0.150	0.106	0.750	1.000	0.250
5/16	0.3125	0.3125	0.3065	1/2	0.500	0.489	0.577	0.557	13/64	0.211	0.195	0.140	0.875	1.125	0.278
3/8	0.375	0.375	0.369	9/16	0.562	0.551	0.650	0.628	15/64	0.243	0.226	0.160	1.000	1.250	0.312
7/16	0.4375	0.4375	0.4305	5/8	0.625	0.612	0.722	0.698	9/32	0.291	0.272	0.195	1.125	1.375	0.357
1/2	0.5	0.5	0.493	3/4	0.750	0.736	0.866	0.840	5/16	0.323	0.302	0.215	1.250	1.500	0.385
9/16	0.5625	0.5625	0.5545	13/16	0.812	0.798	0.938	0.910	23/64	0.371	0.348	0.250	1.375	1.625	0.417
5/8	0.625	0.625	0.617	15/16	0.938	0.922	1.083	1.051	25/64	0.403	0.378	0.269	1.500	1.750	0.455
3/4	0.75	0.75	0.741	1-1/8	1.125	1.100	1.299	1.254	15/32	0.483	0.455	0.324	1.750	2.000	0.500
7/8	0.875	0.875	0.866	1-5/16	1.312	1.285	1.516	1.465	35/64	0.563	0.531	0.378	2.000	2.250	0.556
1	1	1	0.99	1-1/2	1.500	1.469	1.732	1.675	39/64	0.627	0.591	0.416	2.250	2.500	0.625
1-1/8	1.125	1.125	1.114	1-11/16	1.688	1.631	1.949	1.859	11/16	0.718	0.658	0.461	2.500	2.750	0.714
1-1/4	1.25	1.25	1.239	1-7/8	1.875	1.812	2.165	2.066	25/32	0.813	0.749	0.530	2.750	3.000	0.714
1-1/2	1.5	1.5	1.488	2-1/4	2.250	2.175	2.598	2.480	15/16	0.974	0.902	0.640	3.250	3.500	0.833

Check available Sizes of ASME SB 348 Titanium Gr 5 Stud Bolt, Ask For Ready Stock of UNS N56400 Fasteners in Mumbai, India.

BAGODA

Quick Contact

Call Us

+91 22 - 66151721

Need Help? Send us Email

sales@bagodasteelproject.com

Titanium Gr 5 Washer Weight & Dimensions

Bolt Size	A	B	C	Weight (lbs.) Per 100 Pieces
Bolt Size	ID	OD	Thickness	Weight (lbs.) Per 100 Pieces
1/2	9/16	13/8	0.109	4
5/8	11/16	13/4	0.134	8
3/4	13/16	2	0.148	11
7/8	15/16	21/4	0.165	15
1	11/16	21/2	0.165	19
11/8	11/4	23/4	0.165	22
11/4	13/8	3	0.165	26
13/8	11/2	31/4	0.180	33
11/2	15/8	31/2	0.180	38
15/8	13/4	33/4	0.180	43
13/4	17/8	4	0.180	50
17/8	2	41/4	0.180	57
2	21/8	41/2	0.180	63
21/4	23/8	43/4	0.220	83
21/2	25/8	5	0.238	96
23/4	27/8	51/4	0.259	110
3	31/8	51/2	0.284	130

Titanium Gr 5 Stud Bolt Size Chart

Class 150 Flanges ASME B16.5 (Stud bolt sizes)						Length of Stud Bolts
NPS	Outside Diameter of Flange	The diameter of Bolt Circle	The diameter of Bolt Holes	Number of Bolts	Diameter of Bolts	Raised Face 0.06 in	Ring Joint
1/2	3 1/2	2 3/8	5/8	4	1/2	2 1/4	–
3/4	3 7/8	2 3/4	5/8	4	1/2	2 1/2	–
1	4 1/4	3 1/8	5/8	4	1/2	2 1/2	3
1 1/4	4 5/8	3 1/2	5/8	4	1/2	2 3/4	3 1/4
1 1/2	5	3 7/8	5/8	4	1/2	2 3/4	3 1/4
2	6	4 3/4	3/4	4	5/8	3 1/4	3 3/4
2 1/2	7	5 1/2	3/4	4	5/8	3 1/2	4
3	7 1/2	6	3/4	4	5/8	3 1/2	4
3 1/2	8 1/2	7	3/4	8	5/8	3 1/2	4
4	9	7 1/2	3/4	8	5/8	3 1/2	4
5	10	8 1/2	7/8	8	3/4	3 3/4	4 1/4
6	11	9 1/2	7/8	8	3/4	4	4 1/2
8	13 1/2	11 3/4	7/8	8	3/4	4 1/4	4 3/4
10	16	14 3/4	1	12	7/8	4 1/2	5
12	19	17	1	12	7/8	4 3/4	5 1/4
14	21	18 3/4	1 1/8	12	1	5 1/4	5 3/4
16	23 1/2	21 1/4	1 1/8	16	1	5 1/4	5 3/4
18	25	22 3/4	1 1/4	16	1 1/8	5 3/4	6 1/4
20	27 1/2	25	1 1/4	20	1 1/8	6 1/4	6 3/4
24	32	29 1/2	1 1/4	20	1 1/4	6 3/4	7 1/4
Class 300 Flanges ASME B16.5						Length of Stud Bolts
NPS	Outside Diameter of Flange	The diameter of Bolt Circle	The diameter of Bolt Holes	Number of Bolts	Diameter of Bolts	Raised Face 0.06 in	Ring Joint
1/2	3 3/4	2 5/8	5/8	4	1/2	2 1/2	3
3/4	4 5/8	3 1/4	3/4	4	5/8	3	3 1/2
1	4 7/8	3 1/2	3/4	4	5/8	3	3 1/2
1 1/4	5 1/4	3 7/8	3/4	4	5/8	3 1/4	3 3/4
1 1/2	6 1/8	4 1/2	7/8	4	3/4	3 1/2	4
2	6 1/2	5	3/4	8	5/8	3 1/2	4
2 1/2	7 1/2	5 7/8	7/8	8	3/4	4	4 1/2
3	8 1/4	6 5/8	7/8	8	3/4	4 1/4	4 3/4
3 1/2	9	7 1/4	7/8	8	3/4	4 1/4	5
4	10	7 7/8	7/8	8	3/4	4 1/2	5
5	11	9 1/4	7/8	8	3/4	4 3/4	5 1/4
6	12 1/2	10 5/8	7/8	12	3/4	4 3/4	5 1/2
8	15	13	1	12	7/8	5 1/2	6
10	17 1/2	15 1/4	1 1/8	16	1	6 1/4	6 3/4
12	20 1/2	17 3/4	1 1/4	16	1 1/8	6 3/4	7 1/4
14	23	20 1/4	1 1/4	20	1 1/8	7	7 1/2
16	25 1/2	22 1/2	1 3/8	20	1 1/4	7 1/2	8
18	28	24 3/4	1 3/8	24	1 1/4	7 3/4	8 1/4
20	30 1/2	27	1 3/8	24	1 1/4	8	8 3/4
24	36	32	1 5/8	24	1 1/2	9	10

Ready Stock Titanium Gr 5 Fasteners

Ti Alloy Gr 5 Heavy Hex Nuts In Indonesia
Titanium Gr 5 Carriage Bolt Stockist
Titanium Gr 5 Allen Cap Screw In Malaysia
Alloy Titanium Ogee Washer
Titanium Gr 5 Self Locking Nuts In Philippines
Ti Gr 5 Concrete Screw In Mexico
Titanium Gr 5 Double Ended Stud In Japan
Titanium Gr 5 Machine Bolt
Titanium Gr 5 Structural Bolts In Italy
Titanium Gr 5 Dock Washer Stockholder
JIS NCF Gr 5 Stud Bolts
Titanium Gr 5 Hex Washers In Spain
UNS N56400 Fasteners
Grade 5 Titanium Heavy Hex Bolts
Titanium Grade 5 Hexagonal Washer
Titanium Gr 5 Anchor Bolts In Kuwait
Titanium Alloy Gr 5 Hex Head Bolts
Titanium Gr 5 Flange Bolt In Singapore
Ti Alloy Grade 5 Plain Washer Supplier in Mumbai
ASTM B348 Titanium Gr 5 Flat Washers
Titanium Gr 5 Socket Cap Screw
Ti Alloy Grade 5 Bolts
Ti Alloy Gr 5 Washers In Kuwait
Titanium Gr 5 Threaded Rod
Titanium Alloy Gr 5 Hex Head Bolt
Titanium Gr 5 Square Nuts In Spain
Titanium Gr 5 Acorn Nuts
ASTM B348 Titanium Gr 5 Nyloc Nuts
Alloy Titanium Machine Fasteners Exporter
ASTM B348 Titanium Gr 5 Wing Nuts
Titanium Gr 5 Tooth Lock Washer In Italy
Titanium Gr 5 Tie Rods
Titanium Gr 5 Split / Lock Washer
Ti Gr 5 T-Head Bolts
Titanium Gr 5 Fasteners In Japan
Grade 5 Titanium Stud Bolts
Titanium Gr 5 Eye Bolts In Philippines
Titanium Gr 5 Screws Distributor
Titanium Gr 5 Bolts
Titanium Gr 5 Foundation Bolts Manufacturer
Titanium Gr 5 Hex Coupling Nut In Mexico
Titanium Gr 5 Hex Set Screw Manufacturer
DIN 3.7165 Countersunk Washer
Titanium Gr 5 Lock Nut In Indonesia
ASTM B348 Titanium Gr 5 Fasteners
Alloy Titanium Elevator Bolt
Titanium Gr 5 Hex Domed Cap Nuts In Malaysia
3.7165 Fasteners
Alloy Titanium Wing Nuts
Titanium Gr 5 Coupling Nut
ASME SB348 Grade 5 Titanium Fender Washer
Titanium Gr 5 Customized Washer In Japan

Titanium Gr 5 Chemical Composition

Grade	N	C	H	Fe	O	Al	V
Ti Grade 5	0.05 max	0.10 max	0.01 max	0.40 max	0.20 max	5.50-6.75	3.50-4.50

Titanium Gr 5 Fasteners Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Titanium Gr 5	4.43 g/cm3	1632 °C (2970 °F)	Psi – 138000 , MPa – 950	Psi – 128000 , MPa – 880	14 %

Titanium Gr 5 Fasteners

Alloy Titanium Bolts, ASTM B348 Titanium Gr 5 Washers, Titanium Gr 5 Nuts In Philippines, Titanium Alloy Gr 5 Stud Bolts, Titanium Gr 5 Fasteners Price in India.