Alloy 20 Pipe Fittings, Incoloy® Alloy 20 Elbow, CARPENTER 20 Reducer Manufacturer

Alloy 20 Pipe Cap Stockist, Incoloy® ALLOY 20 Two Joint Pipe Fittings, Incoloy® ALLOY 20 Equal Tee In Philippines, Alloy 20 Cross, 2.4660 Reducer, UNS N08020 Pipe Fittings, Alloy 20 LR Elbow, Incoloy® ALLOY 20 Stub End Supplier in Mumbai, India.

With low base hardness and lower work - hardening rate, it specifically proper for cold forming. Resistance to mineral acids in these pipe fittings varies in step with temperature and awareness and whether or not the answer is aerated or not. WNR 2.4660 Cross Pipe Fittings is one of the hardest metals, wherein corrosion resistance is higher in de - aerated acid. Both, warm - rolled and annealed samples, of these pipe fittings have better impact strength than cold - worked material. Corrosion rates in each marine and rural atmospheres are very low in these pipe fittings, which desires to be became and worked at gradual speeds and low feed rates.

It is an alloy (i.e. mixture of or greater factors of which at the least one is metal, and wherein the resultant material has metallic properties). It is constrained to these applications wherein it cannot get replaced with less expensive alternatives. Alloy 20Cb3 Stub End Pipe Fittings is excellent for its toughness that is maintained over a significant variety of temperatures. It is beneficial at temperatures as much as an inclusive of one thousand Degree F in oxidizing atmospheres. Higher temperatures can be hired if these pipe fittings is in a lowering environment. It is climate resistant metal created with the aid of using alloying copper, chromium and nickel.

Material Specification Chart of Alloy 20 Pipe Fittings

Specifications	ASTM B366 / ASME SB366
Dimensions	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
Size	Seamless Fittings : 1/2" - 10" Welded Fittings : 1/2" - 48"
Thickness	SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D
Size Range	½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Connection	Welding
Manufacturing Process	Push, Press, Forge, Cast, etc.
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Specialized Manufacturer of	90 Deg. Elbows, 45 Deg. Elbow, Tee, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend

Alloy 20 PIPE FITTINGS MANUFACTURING STANDARDS

ASTM B366/B366M	Piping Fittings
ASME B16.9	Factory-Made Wrought Fittings Buttwelding
MSS SP-43	Wrought & Fabricated Butt-Welding Fitting for Low Pressure, Corrosion Resistant Applications
BS3799 –	Specification for pipe fittings, Socket-welding and threaded/screwed fitting for the petroleum industry
ASTM B366 – ASME SB366	Standard Specification for Piping Fitting
ASME Standard	ASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43
DIN Standard	DIN28011, DIN2617, DIN2616, DIN2615, DIN2605
EN Standard	EN10253-2, EN10253-1
ASME B16.25	Buttwelding Ends
ASME B16.28	SR Elbows and Buttwelding Returns
API 590-605 ASME B16.9	‘Factory-Made Wrought Butt-welding Fittings’

Various Types Of Alloy 20 Butt weld Pipe Fittings

Alloy 20 Butt weld Elbow

Incoloy® ALLOY 20 Unequal Tee In Indonesia
2.4660 Buttweld Tees
Incoloy® ALLOY 20 Tee
Alloy 20 Reducing Tee
CARPENTER 20 Equal Tee In Malaysia
UNS N08020 Butt weld Tee
ANSI B16.9 Alloy 20 Buttweld Tee

Alloy 20 Butt weld Tee

Alloy 20 Reducing Tee
ANSI B16.9 Alloy 20 Buttweld Tee
Incoloy® ALLOY 20 Tee In Mexico
UNS N08020 Butt weld Tee
2.4660 Buttweld Tees
CARPENTER 20 Equal Tee In Philippines
Incoloy® ALLOY 20 Unequal Tee

Alloy 20 Butt weld Cross

ALLOY 20 Reducing Cross In Japan
Alloy 20 Unequal Cross
Incoloy® ALLOY 20 Cross In Italy
UNS N08020 Butt weld Cross
ANSI B16.9 Alloy 20 Buttweld Cross
2.4660 Buttweld Cross
CARPENTER 20 Equal Cross

Alloy 20 Concentric Reducer

Alloy 20 Concentric Reducer In Spain
ANSI B16.9 Incoloy® ALLOY 20 Concentric Reducer
CARPENTER 20 Concentric Reducer In Kuwait
2.4660 Concentric Reducer
UNS N08020 Concentric Reducer

Alloy 20 Eccentric Reducer

CARPENTER 20 Eccentric Reducer In Singapore
UNS N08020 Eccentric Reducer
ANSI B16.9 Alloy 20 Eccentric Reducer
2.4660 Eccentric Reducer
Incoloy® ALLOY 20 Eccentric Reducer In Indonesia

Alloy 20 Stub End

UNS N08020 Butt weld Stub End
2.4660 Short Stub End
Incoloy® ALLOY 20 Short Stub End In Malaysia
ANSI B16.9 Alloy 20 Lap Joint Stub End
CARPENTER 20 Long Stub End In Kuwait

Alloy 20 Pipe End Cap

2.4660 End Pipe Cap
Incoloy® ALLOY 20 End Cap In Spain
ANSI B16.9 Alloy 20 Pipe End Cap
UNS N08020 Butt weld Cap
CARPENTER 20 Pipe Cap In Mexico

Alloy 20 Pipe Nipple

2.4660 Swage Nipple
CARPENTER 20 Pipe Nipple In Philippines
Incoloy® ALLOY 20 Nipple In Italy
UNS N08020 Butt weld Nipple
ANSI B16.9 Alloy 20 Barrel Nipple

Alloy 20 Pipe Bend

ANSI B16.9 Alloy 20 Bend
CARPENTER 20 Piggable Bend In Japan
2.4660 Hot Induction Bend
UNS N08020 Butt weld Bend
Incoloy® ALLOY 20 Long Radius Bend In Singapore

Equivalent Grades of Alloy 20 Buttweld Fittings

STANDARD	UNS	WERKSTOFF NR.	EN	AFNOR
Alloy 20	N08020	2.4660	NiCr20CuMo	Z2NCUD31-20AZ

View Thickness Table Of Incoloy® ALLOY 20 Buttweld Fittings, We have Global sales network for Alloy 20 LR Elbow, Wide Stockist Of Werkstoff No 2.4660 Seamless Fittings In India.

ASTM B366 Alloy 20 Buttweld Fittings

Seamless/ Welded 100% Radiography Tested
Products		Size
ASTM B366 CARPENTER 20 Elbow – Long Radius	ASTM B366 CARPENTER 20 45° Elbow	Sizes 1/2″ – 48″
ASTM B366 Alloy 20 Elbow – Short Radius	ASTM B366 Alloy 20 Cross
ASTM B366 Alloy 20 3D Elbow	ASTM B366 Alloy 20 5D Elbow
ASTM B366 Alloy 20 Stub End	ASTM B366 Alloy 20 Pipe Bend
ASTM B366 Alloy 20 Fabricated Tee	ASTM B366 Alloy 20 End Cap
ASTM B366 Alloy 20 Reducer	ASTM B366 Alloy 20 Tee
ASTM B366 Alloy 20 Reducing Elbow	ASTM B366 Alloy 20 Pipe Nipple
ASTM B366 Alloy 20 Reducing Cross	ASTM B366 Alloy 20 Eccentric Reducer
ASTM B366 Alloy 20 Concentric Reducer	ASTM B366 Alloy 20 Welded Fittings

Check available Sizes of ASME SB 366 Incoloy® ALLOY 20 Pipe Reducer, Ask For Ready Stock of UNS N08020 Stub End in Mumbai, India.

BAGODA

Quick Contact

Call Us

+91 22 - 66151721

Need Help? Send us Email

sales@bagodasteelproject.com

ASME B16.9 Alloy 20 Short and Long Radius Elbows Dimensions

Nominal Pipe Size (inches)	Outside Diameter		45°Elbows		90° Elbows		180° Returns
	Outside Diameter		Long Radius		Long Radius	Short Radius	Long Radius
	(mm)	(inches)	Center to Face (inches)	Radius (inches)	Center to Face (inches)	Center to Face (inches)	Center to Center (inches)	Back to face (inches)
1	33.4	1.315	7/8		1 1/2	1	3	2 3/16
1/2	21.3	0.840	5/8		1 1/2	–	2	1 7/8
3/4	26.7	1.050	7/16		1 1/8	–	2 1/4	1 11/16
1 1/4	42.2	1.660	1		1 7/8	1 1/4	3 3/4	2 3/4
1 1/2	48.3	1.900	1 1/8	3	2 1/4	1 1/2	4 1/2	3 1/4
2	60.3	2.375	1 3/8	4	3	2	6	4 3/16
2 1/2	73.0	2.875	1 3/4	5	3 3/4	2 1/2	7 1/2	5 3/16
3	88.9	3.500	2	6	4 1/2	3	9	6 1/4
3 1/2	101.6	4.000	2 1/4	7	5 1/4	3 1/2	10 1/2	7 1/4
4	114.3	4.500	2 1/2	8	6	4	12	8 1/4
5	141.3	5.563	3 1/8	10	7 1/2	5	15	10 5/16
6	168.3	6.625	3 3/4	12	9	6	18	12 5/16
8	219.1	8.625	5	12	12	8	24	16 5/16
10	273.1	10.750	6 1/4	15	15	10	30	20 3/8
12	323.9	12.750	7 1/2	18	18	12	36	24 3/8

ASME B16.9 Alloy 20 Tee & Cap Dimensions

Nominal Pipe Size (inches)	Outside Diameter		Caps	Straight Crosses	Straight Tees	Stub Ends
Nominal Pipe Size (inches)	(mm)	(inches)	Length (inches)	Center to End (inches)	Center to End (inches)	Lap Diameter (inches)	Long Length (inches)	Short Length (inches)
1	33.4	1.315	1 1/2	1 1/2	1 1/2	2	4	2
1/2	21.3	0.840	1	–	1	1 3/8	3	2
3/4	26.7	1.050	1	–	1 1/8	1 11/16	3	2
1 1/4	42.2	1.660	1 1/2	1 7/8	1 7/8	2 1/2	4	2
1 1/2	48.3	1.900	1 1/2	2 1/4	2 1/4	2 7/8	4	2
2	60.3	2.375	1 1/2	2 1/2	2 1/2	3 5/8	6	2 1/2
2 1/2	73.0	2.875	1 1/2	3	3	4 1/8	6	2 1/2
3	88.9	3.500	2	3 3/8	3 3/8	5	6	2 1/2
3 1/2	101.6	4.000	2 1/2	3 3/4	3 3/4	5 1/2	6	3
4	114.3	4.500	2 1/2	4 1/8	4 1/8	6 3/16	6	3
5	141.3	5.563	3	4 7/8	4 7/8	7 5/16	8	3
6	168.3	6.625	3 1/2	5 5/8	5 5/8	8 1/2	8	3 1/2
8	219.1	8.625	4	7	7	10 5/8	8	4
10	273.1	10.750	5	8 1/2	8 1/2	12 3/4	10	5
12	323.9	12.750	6	10	10	15	10	6

ASME B16.9 Alloy 20 Concentric & Eccentric Reducer Dimensions

Nominal Pipe Size	Outside Diameter		Reducers
Reduced from (inches)	(mm)	(inches)	Reduced to (inches)	Concentric & Eccentric Length (inches)
1	33.4	1.315	3/8	2
			1/2	2
			3/4	2
1/2	21.3	0.840	1/4	1 1/2
1/2	21.3	0.840	3/8	1 1/2
3/4	26.7	1.050	3/8	2
3/4	26.7	1.050	1/2	2
1 1/4	42.2	1.660	1/2	2
			3/4	2
			1	2
1 1/2	48.3	1.900	1/2	2 1/2
			3/4	2 1/2
			1	2 1/2
			1 1/4	2 1/2
2	60.3	2.375	3/4	3
			1	3
			1 1/4	3
			1 1/2	3
2 1/2	73.0	2.875	1	3 1/2
			1 1/4	3 1/2
			1 1/2	3 1/2
			2	3 1/2
3	88.9	3.500	1	3 1/2
			1 1/2	3 1/2
			2	3 1/2
			2 1/2	3 1/2
3 1/2	101.6	4.000	1 1/4	4
			1 1/2	4
			2	4
			2 1/2	4
			3	4
4	114.3	4.500	1 1/2	4
			2	4
			2 1/2	4
			3	4
			3 1/2	4
5	141.3	5.563	2	5
			2 1/2	5
			3	5
			3 1/2	5
			4	5
6	168.3	6.625	2 1/2	5 1/2
			3	5 1/2
			3 1/2	5 1/2
			4	5 1/2
			5	5 1/2
8	219.1	8.625	3	6
			3 1/2	6
			4	6
			5	6
			6	6
10	273.1	10.750	4	7
			5	7
			6	7
			8	7
12	323.9	12.750	5	8
			6	8
			8	8
			10	8

Alloy 20 Buttweld Fittings Weights(Kg)

Product range and theoretical weights (kg)
DN	Schedule 10S			Schedule 40S			Schedule 80S
DN	90° Elbow	45° Elbow	Equal tee	90° Elbow	45° Elbow	Equal tee	90° Elbow	45° Elbow	Equal tee
8	0.02	0.01	0.03	0.03	0.02	0.06	0.04	0.03	0.07
10	0.03	0.02	0.05	0.03	0.02	0.03	0.06	0.04	0.09
15	0.06	0.03	0.09	0.08	0.04	0.10	0.10	0.05	0.14
20	0.07	0.03	0.13	0.08	0.04	0.17	0.11	0.05	0.20
25	0.14	0.08	0.28	0.15	0.11	0.29	0.22	0.14	0.38
32	0.23	0.11	0.49	0.26	0.17	0.59	0.40	0.23	0.68
40	0.30	0.17	0.68	0.40	0.23	0.86	0.51	0.29	1.02
50	0.50	0.25	0.85	0.70	0.4	1.28	0.91	0.59	1.59
65	0.85	0.48	1.41	1.40	0.77	2.19	1.81	0.99	3.13
80	1.25	0.63	1.77	2.20	1.08	3.31	2.97	1.50	4.45
90	1.70	0.75	2.67	2.83	1.42	4.08	4.00	2.00	5.44
100	2.10	1.08	3.46	4.47	2.09	5.27	6.18	2.81	7.71
150	5.45	2.72	8.07	10.89	5.44	10.99	16.32	8.16	13.61
200	10.20	5.33	15.65	21.54	10.77	20.91	33.11	16.96	28.12
250	18.15	9.75	26.46	38.56	19.27	35.38	51.71	25.86	49.90
300	25.80	13.62	39.46	59.42	29.71	62.14	79.38	39.69	83.91

Product range and theoretical weights (kg)
DN	Schedule 10S			Schedule 40S			Schedule 80S
DN	Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee
40x.25	0.19	0.19	0.60	0.26	0.26	0.76	0.34	0.34	0.90
50x25	0.28	0.28	0.73	0.40	0.40	1.10	0.54	0.54	1.37
50x40	0.31	0.31	0.76	0.45	0.45	1.15	0.59	0.59	1.43
80x.50	0.55	0.55	1.56	1.00	1.00	2.91	1.79	1.79	3.91
100x50	0.78	0.78	2.94	1.50	1.50	4.48	1.95	1.95	6.55
100x80	0.87	0.87	3.04	1.74	1.74	4.64	2.33	2.33	6.79
150x80	1.82	1.82	6.86	3.95	3.95	9.68	5.51	5.51	11.57
150x100	1.96	1.96	7.10	4.07	4.07	11.94	5.96	5.96	11.97
200x100	3.01	3.01	13.46	6.55	6.55	17.98	9.23	9.23	24.18
200x150	3.19	3.19	14.08	6.74	6.74	18.82	10.12	10.12	25.31

Ready Stock Alloy 20 Pipe Fittings

Incoloy® ALLOY 20 Butt Weld Pipe Fittings
Incoloy® ALLOY 20 Two Halve Butt weld Fittings
1/2” - 16” ASTM B366 CARPENTER 20 Butt weld Elbow
Alloy 20 End Cap Distributor
Alloy 20 Long Radius Bend Stockholder
DIN 2.4660 Swage Nipple
Incoloy® ALLOY 20 Reducer In Indonesia
CARPENTER 20 Reducing Nipple In Malaysia
CARPENTER 20 Long Radius Elbow
Incoloy® ALLOY 20 Welded Fittings
Alloy 20 180° LR Return Bends In Mexico
ANSI B16.9 Incoloy® ALLOY 20 Pipe Cap
ASTM B366 CARPENTER 20 45 Degree Elbow
CARPENTER 20 1D Elbow/3D Elbow/5D Elbow In Philippines
Incoloy® ALLOY 20 Buttweld Fittings
2.4660 Butt weld Fittings
Incoloy® ALLOY 20 Long Stub End In Japan
Alloy 20 Equal Cross In Italy
Alloy 20 Pipe Elbow In Spain
DIN 2605 Incoloy® ALLOY 20 Elbow Exporter
CARPENTER 20 Mandrel Pipe Bend
SCH 60 Alloy 20 Pipe Nipples
Schedule 80 Incoloy® ALLOY 20 Grade Long Stub End
ASME SB366 Alloy 20 Lateral Tee
Alloy 20 Two Joint Pipe Fittings In Kuwait
UNS N08020 Pipe Fittings
Incoloy® ALLOY 20 SR Elbow In Kuwait
5" Nb Sch10s Incoloy® ALLOY 20 90° Short Radius Elbow
ASME B16.9 Incoloy® ALLOY 20 Buttweld Fittings
CARPENTER 20 LR Elbow Stockist
Incoloy® ALLOY 20 Seamless Fittings In Singapore
Incoloy® ALLOY 20 Pipe Bend
Alloy 20 Buttweld Nipple In Spain
Sch 80 Incoloy® ALLOY 20 Pipe Fittings
Alloy 20 Pipe Fittings Manufacturer
CARPENTER 20 Barrel Nipple Supplier in Mumbai
ASME B16.9 Schedule 10 Alloy 20 Elbow
Alloy 20 Eccentric Reducer In Indonesia
Alloy 20 Lap Joint Stub End In Japan
ASTM B366 Incoloy® ALLOY 20 Buttweld Fittings
ANSI B16.9 Incoloy® ALLOY 20 Short Stub End
CARPENTER 20 Eccentric Reducer Manufacturer
15 NB SCH 10 Incoloy® ALLOY 20 90° Short Radius Elbow
ASTM B366 Incoloy® ALLOY 20 Pipe Fittings
Alloy 20 Butt weld Tee In Malaysia
ASTM B366 Incoloy® ALLOY 20 Stub End
Incoloy® ALLOY 20 Piggable Bends In Mexico
Alloy 20 Elbow In Philippines

Alloy 20 Butt weld Fittings Chemical Composition

Grade	C	Mn	Si	S	Cu	Ni	Cr	Fe	Mo	P
Alloy 20	0.07 max	2.00 max	1.00 max	0.035 max	3.00 – 4.00	32.00 – 38.00	19.00 – 21.00	29.85 min*	2.00 – 3.00	0.045 max

Alloy 20 Pipe Fittings Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Alloy 20	8.1 g/cm3	1443 °C (2430 °F)	Psi -80,000, MPa -551	Psi – 35,000, MPa – 241	30 %

Alloy 20 Pipe Fittings

ANSI B16.9 Alloy 20 Short Radius Elbow, ASTM B366 Alloy 20 Buttweld Pipe Fittings, Incoloy® ALLOY 20 Elbow In Indonesia, Alloy 20 Buttweld Fittings, CARPENTER 20 90 Deg. Elbow Price in India.